Leister Locomotive Works Project Thread

[Fish4890]

image.png
the Prvious Photo didnt Blow up to fullsize

[jdgremsjr]

have to agree i try myself if its not perect and the L&N Gevo is Done up Last night and Ready to upload after i do pull my 10,4k Stacker in the siding in a diffrent game....

the IACs are Still Coming but what cabs do them use AAR or Desktop ??

But, likewise Fish4890, if someone is just trying to give you constructive criticism, you should try not to take offense to that and take it in the spirit is was offered. We are all adults here. Getting offended and your ego hurt when someone was just trying to help isn't right either. Maybe take things like that into consideration before jumping to conclusions. We are suppose to be adults here and we should act like it, and not like 3rd graders fighting over a kick ball during recess.

Again, this is my own personal opinion, and does not represent the opinion of the staff or the official stance of this website.

[CSRX]

have to agree i try myself if its not perect and the L&N Gevo is Done up Last night and Ready to upload after i do pull my 10,4k Stacker in the siding in a diffrent game....

the IACs are Still Coming but what cabs do them use AAR or Desktop ??

They use the same cabs as the SD70ACe's delivered to NS, that hasn't changed on the IAC's.

This photo was from the SD70M-2 of VTR, but the cabs were the same on the NS SD70ACe. Only difference was, there was a second screen to the right of the screen shown below in my photo.

The PTC screens what not will be to the left of the engineer, almost off screen of this photo..

[spoony1999]

Just downloaded the B&O Heritage Unit. You might want to check the real loco and compare it to yours. The back logo is to big and you have the logo and 1827 number reversed on the long hood. You also have the lightning bolt under the cab window pointing the wrong way on one side (same issue with the Chessie Heritage Unit)

Helpful hint
You're still releasing the heritage units with the lightning bolt facing the wrong way on one side of the cab . It should point forward on both sides of the cab

[Fish4890]

Noted

[Fish4890]

image.png

a Huntington ,WV Rebuilt CSX SD70MAC or MACe

1. What Cab should i use
2. and What not....


From FB CSX EQUIMENT UPDATES THEM SELVES

8/6/2023 NEW REBUILD RELEASE
CSX just released first 2 units of the newest batch of SD70MAC rebuilds yesterday, 4771 and 4767. These units will be DP Capable and retained the flared radiators. 4704, 4706, 4707, 4710, 4711, 4713, 4714, 4715, 4718, 4719, 4720, 4724, 4725, 4729, 4730, 4732, 4733, 4735, 4736, 4740, 4741, 4742, 4745, 4746, 4748, 4749, 4753, 4754, 4755, 4757, 4762, 4763, 4765, 4766, 4767, 4771, 4775, 4776, 4778, 4785, 4786, 4792, and 4794 CONFIRMED for rebuilding

[Fish4890]

if i can get the Bolt correct i could do 4704 to 4720 for Pack 1 and 4724 to 4753 for Pack 2 so far as i can see

[eric]

Who realistically needs more than 5 of the same general type? Pick some random numbers within the range and you'll have variety.

[Fish4890]

True thats what im going to do

[CSRX]

"SOUND AND CABVIEW INCLUDED"

May I ask why you are including the sound and cabview folders from Trainsimulations? That to me is just as bad as sharing the shape files in the downloads...

[eric]

That's a good question. The Danny Beck models specifically did not come with either sounds or cabviews.

I've pulled those from circulation until Brandon can confirm where they came from.

[rt35ge]

For as long as I can recall, any repaint for a SLI engine needed the shape file, and capview/sound folders. Of course one could swap out the SLI cabview and sound folders with something else. The shape file and SLI cab and sound folders shouldn't be part of the file.

[jdgremsjr]

Fish4890 using payware cabs and distributing as your own work is a violation not only of our rules here, but of copyright laws. No matter how many times you say that it is false doesn't make it so. So you better brush up on the laws and the rules here a bit better before calling other members liars or posting illegal works to the website that could get the site shut down and in legal trouble.

[jdgremsjr]

That's a good question. The Danny Beck models specifically did not come with either sounds or cabviews.

I've pulled those from circulation until Brandon can confirm where they came from.

They sure didn't, they didn't even come with .eng files if I remember correctly. That is why I had to go to Dale's Siskiyou Pass Website and download the ones he recreated to get the content there to save me all the time and effort of doing it myself. I know that aliasing sounds and cabs wouldn't too much effort but I would hate to have to re-create .eng files from scratch without some sort of template to guide me.

[jdgremsjr]

Fish4890 just so you know here is the readme file from the straight from the original Danny Beck "UP set release"

These are files I am releasing to the public from my personal library. I (Danny Beck) am the original author of these files and
have decided to make them freeware. Feel free to reskin them as you like. Feel free to share these files as you like.
Contained are only the .S and .ACE files. You will need to create your own phyics files, sound files, etc. Streamlines or myself are not
responsible for offering support regarding these files.

Enjoy!

Where in this readme does it say that the cab files, sound files, or even the .eng files are included? So again I think you owe Eric an apology.