Leister Locomotive Works Project Thread

[Fish4890]

and the C&O Heritage Unit has Dropped from CSX and I am Currently Working on er

[Fish4890]

OOPS i Clicked of my GIF for the Assorted Loco pack 1

This was the Main Attraction of the Set

[marklester01]

Of note, I thank you for being able to Have The NS ES44AC 8105 ( Interstate Heritage Unit ) done to The "Current State" as in Paint & PTC above The Cab+Door Parts F/A. However, The Back needs some adjusting maybe? Since it's an NS-Unit, It gets used LHF alot( hence The Back Ditch-Lights that also wig-light/flash in Real-Life ). My thing isn't The Grab-Irons, but the gray-Plank not paint over to match the rest of the paint, Light-turned( It's stright instead of left-right ), & there's the water-fill tank back there? Anyway to change it later, eighter F/A added or such? I mean, no big-deal if don't LHF alot or look to the back that often. I know one NS Engineer Purposely once had The Lead Unit LHF on one of His Trains He was operating to have ready for The Shop once He got The Train to The Next Yard for Crew Change because it was due for The 90-Day FRA Inspection. He said all it took was looking extra-careful out the mirrors a tad more. So, it really does matter on Crew & Mgnt. in Real-Life too.

[FireEngine]

Did anybody get Nolfolk Southern 1110 to work with the textures correct? I've tried to sms the 1114 it requires to work and my textures are messed up when I tried it? Can you upload a working one so we can download it? I like the assorted pack a lot! Thanks A Lot! Much Appreciated!

[Fish4890]

did you not read the readme i said NS 1014 DOT S

[Fish4890]

image.png

Oh My Sorry I done a Goof

you dont need to edit that s. file

[eric]

Upload a fix with a new filename....

Sent from my SM-S911U using Tapatalk

[Fish4890]

well as i know of its just a Goof with the Read me

[Fish4890]

huh removal canadates ehh thats it

[eric]

That's the default category for uploads before they're approved.

What you really should do is upload the entire package again with the correct read me. Nobody is going to look for a fix by itself.

[Fish4890]

sorry didnt know

[wwhall]

Just a note on the CN 3115 ET44. That prototype locomotive has the "whaleback" exhaust design, not the squared-off one used on the first batch of CN ET44's. Thus, the FA on the CN 3115 model is incorrect. The other 2 prototype locomotives in the 3 model set are from the first batch of CN ET44's that have the squared-off exhaust. For information, GE abandoned the squared-off exhaust design on the locomotive roof because one of the railroads (CSX, I think) complained that they had clearance issues in some tunnels.

[Fish4890]

no Negitave Here so were at the end of an era

[qballbandit]

"no Negitave Here so were at the end of an era"

This means what, exactly? The way I read, it, and a lot of what you post is up for interpretation, is that you took Wade's comments as "negative feedback". If so, I think you need to understand the difference between negative and constructive comments. There was absolutely NO negative connotation in Wade's response. His was a prime example of CONSTRUCTIVE comments and advice.

If I misinterpreted your foggy comment, then please accept my apologies.

[Fish4890]

"no Negitave Here so were at the end of an era"

This means what, exactly? The way I read, it, and a lot of what you post is up for interpretation, is that you took Wade's comments as "negative feedback". If so, I think you need to understand the difference between negative and constructive comments. There was absolutely NO negative connotation in Wade's response. His was a prime example of CONSTRUCTIVE comments and advice.

If I misinterpreted your foggy comment, then please accept my apologies.

i get that who made them ---> RailfanPhil did them and he done the parts.ace file with no numbering nor the BC Logo on 3115 also on 3023 Left out the numbering and the other stuff on it Talk to him not me...