New msts installation please?

[slipperman]

Hi Paul,
I feel you're becoming a little confused!
I haven't run the activity but this is what my ActivityTimesChanger utility shows as being the Player's station stops and times :
Twins to Sheffield.jpg
You say that "the Activity finished at Chesterfield". What do you mean, exactly, when you say that? If it had finished at Chesterfield, you would NOT have been able to continue to Sheffield !

Cheers,
Ged

[pcohen]

Ged, thanks for your reply.

With all due respect, I know what happened.

When approaching Luton station I noticed that the Next Station Box said I had already Arrived and Departed Luton Indicating that I was on my way to Wellingborough..

This happened at every Station, saying I was One station Ahead of where I actually was. As said the Activity Ended tab came up at Chesterfield.

As also said, I was able to carry on to Sheffield (Midland} maybe because I was running in "Autopilot Mode" with no further Rolling Stock Movement.

As I started this reply, I also Restarted "The Twins to Sheffield" Activity because I mistakenly delete the Log File.

Will keep you Informed of exactly what happens.

Thanks

Paul.

[pcohen]

Hi Ged.
When leaving St Pancras Station a few seconds into the Activity the train pauses for a moment and the Next station Box changes to the following:-

Luton Arrived and Departed next Station Wellingborough. And the Train continues

Again, Is this because I am running In "autopilot" or should It make no difference?

Thanks

Paul.

[slipperman]

Hi Paul.
I have just run "The Twins to Sheffield" using the Thames_Trent_Version_3 route with Open Rails Stable version 1.6 and Autopilot at normal speed (100%).
It stopped at Luton and Wellingborough without problem, except that it was more than 3 minutes and more than 6 minutes late respectively, but that's OK because OR runs more realistically!

I'm sorry, but I have absolutely no idea why you are having that problem!

I have compared our log files and the only difference of any importance (in my opinion!) is this on yours you have a missing AI train :

Warning: Ignored missing engine C:\1MSTS\trains\trainset\St Albans Fowler 3F Tanks\#MML_47261.eng in consist C:\1MSTS\TRAINS\CONSISTS\tt_#_3F_47244_47261+Vansx 22.CON

You are also missing some route scenery objects which, I think, may be because you don't have NewRoads installed.

...but I'm pretty sure neither of those would cause your run to skip a station stop!

Cheers,
Ged

[pcohen]

Hi Ged.

I have solved the Problem by replacing the Route, Stock & Activities.

Next station Box now working correctly.

Thanks

Paul.

[pcohen]

Hello again, it's me.

You mentioned adding some more AI trains to the Route, Is this for your own use? or will It be made available to Download please.

Thanks

Paul.

[slipperman]

Hi Paul,
To whom are you directing your last post?

I only mentioned that your log file shows you've not added a loco which means one of the AI consists will have a gap between its lead loco and its wagons.
You need to install fileID 30236 (St Albans Fowler 3F Tanks).

The activity has about 25 AI trains, isn't that enough?

Cheers,
Ged