UP GETMV activity for the SP Shasta Route

[CSRX]

Been trying to get this activity finished, but for some reason the AI now decides to stop on the main, and the siding at Black Butte, and I cannot continue past the signal at Klamath Falls.

This package requires a ton of stuff from TrainSimulations, here, and Toronto Mainline Trains, but I've included all the consist files used, in order to swap out the cars or engines for what you prefer to use.

Not sure if it matters, but it was built in TSRE v8.004 and have been testing in the stable version of ORTS v1.5.1

Thanks for any help.

[R. Steele]

For this activity, is it necessary to have "Location linked passing path processing" checked? ...just a shot in the dark.

[CSRX]

For this activity, is it necessary to have "Location linked passing path processing" checked? ...just a shot in the dark.

Gerry,
Yes, I have it set for that always.

I ended up reinstalling the route, and it seemed to have fixed this problem. For some reason, something was changed on one of the world files and I accidentally clicked save, and it must have messed up the signal system.

All is good now!

[dedrickfranklin]

hello all where can find this act

[derekmorton]

You can't, if you read the first post:-

Been trying to get this activity finished

[PerryPlatypus]

Gerry,
Yes, I have it set for that always.

I ended up reinstalling the route, and it seemed to have fixed this problem. For some reason, something was changed on one of the world files and I accidentally clicked save, and it must have messed up the signal system.

All is good now!

This makes me feel better, genuinely.

I tested the crap out of the signal system on Shasta to make sure it was pretty robust, so I was worried something got goofed.

Despite claims to the contrary, TSRE can still be very unforgiving with interactives. (and this is just another reason we need an activity editor that is not built into the route editor environment)

[CSRX]

Yeah, no worries on your end Sean. This was definitely a goof on my end. Not exactly sure what it had changed, but it definitely made something go haywire. The clean install did the trick.


The activity has been out on hold again however until I can get all the TMT items used, replaced. Unfortunately the accuracy of their physics have some very poor braking forces in play, so the train does not want to slow down going down the hill towards Andesite, due to this, I won't be able to provide updates to those cars either per Ian's policy, so I'm looking into replacing with cars already available, or diving into making some of those cars myself on the TS model from the Mullan Pass.
I'm hoping the end of next week, this activity will be available to the public. However fair warning, it's going to require a lot of additional downloads and or purchases.