Coming soon: New OR Diesel Exhaust Effects

[rdamurphy]

Locomotives sitting on siding at idle still display heavy run 8 exhaust. Can this be looked at?

You're going to have to be a lot more specific than that...

Each individual locomotive has parameters in the .eng file that define the exhaust effects.

Robert

[rdamurphy]

@rdamurphy;

Can you take an look at NALW Jettrain ? Before your mod, It smoked so much that you could barely see the train, since your mode, it doesn't smoke at all.

Thanks

Can you give me the exact file name?

Robert

[rrroberttt]

The file name is "Bomb_jet.zip", by NALW. It is located here in the file library.

[apco25]

I am being specific. I have tried many different locomotives when they are only being used on loose, non player consists. As of version x1587 if a locomotive is part of a loose consist the exhaust is at full rate and volume when it should be at idle.

You're going to have to be a lot more specific than that...

Each individual locomotive has parameters in the .eng file that define the exhaust effects.

Robert

[seagoon]

.....I have tried many different locomotives when they are only being used on loose, non player consists. As of version x1587 if a locomotive is part of a loose consist the exhaust is at full rate and volume when it should be at idle.

That's the type of specificity that narrows down the problem.
Your original post was too broad.

Bruce

[apco25]

Is it possible to have 4 exhaust locations specified and displayed by OR?

[dcarleton]

Is it possible to have 4 exhaust locations specified and displayed by OR?

Yes it is.
3DTrains FT A unit:

Effects
(
DieselSpecialEffects
(
Exhaust1
(
0.0 4.5 -0.9363
0 1 0
0.15
)
Exhaust2
(
0.0 4.5 -3.6339
0 1 0
0.15
)
Exhaust3
(
0.0 4.5 -1.8355
0 1 0
0.15
)
Exhaust4
(
0.0 4.5 -2.7347
0 1 0
0.15
)
)
)


3DTrains FT B unit:

Effects
(
DieselSpecialEffects
(
Exhaust1
(
0.0 4.5 0.8601
0 1 0
0.15
)
Exhaust2
(
0.0 4.5 3.5578
0 1 0
0.15
)
Exhaust3
(
0.0 4.5 1.7592
0 1 0
0.15
)
Exhaust4
(
0.0 4.5 2.6585
0 1 0
0.15
)
)
)

[wwhall]

I am being specific. I have tried many different locomotives when they are only being used on loose, non player consists. As of version x1587 if a locomotive is part of a loose consist the exhaust is at full rate and volume when it should be at idle.

Just to bump this up, it appears this is still the case in the latest v1795 release.