Official v645 Thread

[kox]

I drove through the whole route and could not find the crossing you mentioned. Could you please pinpoint that for me, i.e. start from which station heading towards which, how far away from the station? I used a fast train to traverse the route, so I may miss it.

I tried again, it's not the level crossings. Not 100% but i think there this error isn't exists (i'm not sure, because on that route every level crossing have a real signal very close next to it).

PS: no, this error isn't exists on other routes now i tried with hisiatsu line. So i'm gonna ask about the level crossings the maker of alfold5 route, if i can reach him.

[csantucci]

I can help a bit I hope.

Starting from the Tirano end, you will reach a location with a station and a few tracks on left and right. As you leave the station, there is a good climb with a turn to the right. If I am remembering correctly, the crossing in question is at that point. (From memory, I haven't run that route in a while.)

Google maps to the rescue - Campocologno is the town I think.

GaryG

Hi Gary, jjtang is referring to the kox issue, that isn't related to the Bernina route. jjtang posted that he already solved the Campocologno crossing issue.

Carlo

[Dralex]

Thank you, Longiron. I am using the SD402. I shall attach the log file so you can see exactly what is happening.
As far as I can remember I got the loco by installing Jim Ward's Port Ogden & Northern V11. That download as a folder that contains the loco. I have also an SD40. The activity, which has the short name of whitpull.act (it is the Marias Pass acivity 'Whitefish freight pull' where you have to pull a consist of 3 such locos plus 50 mixed freight cars.
I hope that you can glean a lot of info from the log file. For me this is not possible.
BTW, the acivity itself seems to be a new one beginning with MSTS 2.1 (I believe this is the MSTSbin patch which I do use). I also seem to remember that trainsim.com is where I downloaded it from.

Thank you,
Dralex

Sorry, but there is a limit of 19.5 kB for uploaded files, and the logfile is something about 47 kB. Please tell me what I can do now.

[csantucci]

Excuse me for the trivial question, but have you zipped it? If not, zip it and it will go below threshold.

[longiron]

Thank you, Longiron. I am using the SD402. I shall attach the log file so you can see exactly what is happening.
Thank you,
Dralex

The log file is very important. The rest we can download ourselves. Can you confirm it's that EXACT ENG via README or something? BTW, if OR encounters issues with loading textures and sounds, it just logs the error. That's why you're getting a transparent ENG. It does not fail like MSTS.

[Dralex]

Thank you, Csantucci. I could pack the log file and the engine's eng file into one archive.
Thank you, Longiron, for the quick help. After compression in .rar format the archive is way below the limit. The problem is now that the uploader tells me the file is invalid. It seems .rar files are not allowed as attachment. Will try .zip now.
Yes, file size is now 8 KB.

[Train-a-Mania]

I seem to be having issues with 3DTrainstuff's Donner Pass. I hope it helps with other bugs people may be having.

DonnerPassOpenRailsLog.zip

[longiron]

I seem to be having issues with 3DTrainstuff's Donner Pass. I hope it helps with other bugs people may be having.

It appears that Open Rails is looking for an crossing sms file located in "E:\MSTS\Train Sim-Donner\Train Simulator\ROUTES\3DTS_DONNER1\sound\crossing.sms" Can you confirm that the file exists in the proper folder?

With the crossing sound being a recent addition, we've haven't put in a lot of coding to elegantly skip missing files as we've done in other places

[longiron]

Thank you, Csantucci. I could pack the log file and the engine's eng file into one archive.
Thank you, Longiron, for the quick help..

There's an extra bracket ")" somewhere in the s file that Open Rails is not expecting. Can you upload the SD40 shape file?
Thanks

[Train-a-Mania]

It appears that Open Rails is looking for an crossing sms file located in "E:\MSTS\Train Sim-Donner\Train Simulator\ROUTES\3DTS_DONNER1\sound\crossing.sms" Can you confirm that the file exists in the proper folder?

With the crossing sound being a recent addition, we've haven't put in a lot of coding to elegantly skip missing files as we've done in other places

That did the trick. I added a crossing.sms from another route and it had no issues loading. The route likely uses a differently named .sms file for its crossing sounds.

Thanks for the help!

[longiron]

That did the trick. I added a crossing.sms from another route and it had no issues loading. The route likely uses a differently named .sms file for its crossing sounds.

Thanks for the help!

Probably there's a lone Level Crossing that was never aliased to the new sms name.

[kox]

I tried again, it's not the level crossings. Not 100% but i think there this error isn't exists (i'm not sure, because on that route every level crossing have a real signal very close next to it).

PS: no, this error isn't exists on other routes now i tried with hisiatsu line. So i'm gonna ask about the level crossings the maker of alfold5 route, if i can reach him.

Now i aske the maker of route about the level crossings. He says there is no any unique in those level crossings, according to default crossings.

[longiron]

Did some more tests to get to the bottom of this error and can not find a reason why some locos cause it.

Otto,
We are having trouble reproducing the errors you're experiencing which may be related to some unique folder structure you have.

Would you mind taking a few screen shots or describe the hierarchy of your folder structure for your normal and mini routes? That way we could set up an identical structure to trace where the problem lies.

thank you

One last question: What's the OS of the computer you are having problems on? Win7?

[longiron]

Any idea why this self created activity will not run in CP Mactier Sub v1.5

Yes, I believe the CP_SD90MAC_9301 engine is your problem, not the activity itself. Can the OR team download a copy somewhere?

[csantucci]

I ran the "Old Helper" activity of the Bernina route. In this activity the player train coming from St. Moritz couples to an EMU waiting at Pontresina (about 10 minutes after depart from St. Moritz). Just after coupling I pressed Ctrl+E to switch locomotive, but (I don't know if before of after pressing Ctrl+E) ORTS froze (clock stopped) and I had to fiddle a bit to exit it. The attached log file shows this error at its end:

runactivity.exe : Error : 0 : System.ArgumentOutOfRangeException: Index not within interval. Richiesto valore non negativo e minore della dimensione dell'insieme.
Nome parametro: index
in System.ThrowHelper.ThrowArgumentOutOfRangeExceptio n(ExceptionArgument argument, ExceptionResource resource)
in System.ThrowHelper.ThrowArgumentOutOfRangeExceptio n()
in System.Collections.Generic.List`1.get_Item(Int32 index)
in ORTS.CabCamera.SetCameraCar(TrainCar car)
in ORTS.CabCamera.OnActivate(Boolean sameCamera)
in ORTS.Camera.Activate()
in ORTS.Viewer3D.HandleUserInput(ElapsedTime elapsedTime)
in ORTS.UpdaterProcess.Update()
in ORTS.UpdaterProcess.UpdateLoop()

Regards

Carlo

OpenRailsLog.zip