The poorest part of TSRE, in my opinion, is the cuts & fills but I found a combination of parameters that works well for me. I use: Size=1, Embankment & Cut =5, and the last #=9. Now there is a caveat which Eric mentioned a while back. I find that for tangents up to about 100M this combination USUALLY shapes things for the length of the track or road piece. If it is a curve the limit seems to be 5 degrees of turn regardless of radius. The issue for me was that other values made the flat area under the track a lot wider than real. But this seems to work.
Jerry Sullivan
Jerry Sullivan
Comment