Unable to get Consist Editor to load

[MsSheare]

I know I did this correct as all my train stuff is located in the E Drive.

So when I add the address to it which is e:/msts/train simulator/trains

It will display only e:/msts/train simulator then it will act like it is loading then it shuts off.

[jonpd]

Check in the directory where TSRE is located there should be a log file there named log.txt. It may help with determining what caused it to crash.

Jon

[MsSheare]

all I see is [E] libpng warning: iCCP: known incorrect sRGB profile

[jonpd]

I have seen those errors, it is usually followed by a path and seems to indicate it could not find trainsets and/or consists in the path it was given.

[crstagg]

I know I did this correct as all my train stuff is located in the E Drive.

So when I add the address to it which is e:/msts/train simulator/trains

It will display only e:/msts/train simulator then it will act like it is loading then it shuts off.

Address should be to root folder of install NOT to the Trains folder. As in D:\MSTS.

[MsSheare]

Address should be to root folder of install NOT to the Trains folder. As in D:\MSTS.

my second drive is listed as E:

this is what I see at the top of the Log file

[I] "settings.txt"
[I] devicePixelRatio 1
[I] arg1 "--conedit"
[I] Run con editor
[E] libpng warning: iCCP: known incorrect sRGB profile
[I] /trains not exist: "F:/train simulator/trains"
[I] "cerecent.txt"
[I] ok
[E] libpng warning: iCCP: known incorrect sRGB profile
[I] "e:/msts/train simulator/trains/trainset/"
[I] 1309 dirs


this appears at the top of the cerecent file

e:/msts/train simulator/

this is the settings file

consoleOutput = false

# main directory of your game data
gameRoot = F:/train simulator

# route directory name to load on startup by default
routeName = asdasasdasd1233

# optional start tile
#startTileX = -5306
#startTileY = 14961

# route edit
#createNewIfNotExist = true
writeEnabled = true
writeTDB = true
#deleteTrWatermarks = true
#deleteViewDbSpheres = true

# geo data
geoPath = F:/hgst

# misc
#systemTheme = true
#colorConView = #FF0000
#colorShapeView = #00FF00
#toolsHidden = true
usenNumPad = true
tileLod = 2
objectLod = 4000
maxObjLag = 10
allowObjLag = 1000
#cameraFov = 20.0
leaveTrackShapeAfterDelete = false
#renderTrItems = true
#useImperial = false
#ortsEngEnable = false
#oglDefaultLineWidth = 2
shadowsEnabled = 1
#shadowMapSize = 8192
#textureQuality = 4
ignoreMissingGlobalShapes = true
snapableOnlyRot = false
imageMapsUrl =
#AASamples = 16
#mapImageResolution = 2048
#cameraStickToTerrain = true
#mouseSpeed = 0.1
#mainWindowLayout = W
#ceindowLayout = CU1
#useQuadTree = false
#fogColor = #D0D0FF
#fogDensity = 0.5
#defaultElevationBox = 0
#defaultMoveStep = 0.25

[crstagg]

Point TSRE to e:/msts/train simulator

Edit Settings Line
gameRoot = F:/train simulator
to
gameRoot = E:/msts/train simulator

[MsSheare]

still get the same error codes.

[I] "settings.txt"
[I] devicePixelRatio 1
[I] arg1 "--conedit"
[I] Run con editor
[E] libpng warning: iCCP: known incorrect sRGB profile
[I] ok
[I] "cerecent.txt"
[I] ok
[E] libpng warning: iCCP: known incorrect sRGB profile
[I] "e:/msts/train simulator//trains/trainset/"

Also on the settings file do I need to change this line as well?

# geo data
geoPath = F:/hgst

[crstagg]

Open your cerecent.txt file in your TSRE folder and edit
"e:/msts/train simulator//trains/trainset/"
to
"e:/msts/train simulator

[MsSheare]

Sent you a PM Charles

[MsSheare]

Okay on the cmd.exe I have the following

E:\TSRE>TSRE5_v0.698.exe --conedit

[MsSheare]

Okay I re installed TSRE but msts will still not work but the trainsimulation did right off.

[crstagg]

Okay I re installed TSRE but msts will still not work but the trainsimulation did right off.

Post your cerecnet.txt

[MsSheare]

e:/msts/train simulator
e:/trainsimulations

[crstagg]

e:/msts/train simulator
e:/trainsimulations

If e:/msts/train simulator contains subfolders Global, Sound, Trains and Routes, then it should work unless there is an error in the first item (as in ENG or WAG file) it reads. Attach your Log file. (May have to Zip it.)

FYI TSRE-CE loading sequence is the Contents of the Trainset alphabetically by folder name then Consists and then the Activities