Rogers Pass in TSRE errors

[kasik]

Hi I have a lot of errors in in TSRE. Is it something to worry about or is not a big deal ?
image.png d

[derekmorton]

With Rogers Pass being a commercial route, and its age, it will not be fixed.
It works ok, so ignore the errors.

[kasik]

ok thx

[geepster775]

If you have things set to autofix, it doesn't leave things in an error state. My copy shows it was actually fixed.

I believe I had a total of 140 errors listed.

[geepster775]

Of course, the reigning champion so far is the revamped Pokey 2.0, all 12.5 GB of it, with a whopping 3,291 errors. (3,290 with the 2 patches applied)

It is nice to have new tools to check the integrity of routes, but if we ignore the problems in our deference to *having anything new*, just how far ahead are we as a group???

(Autofixing the Pokey 2.0 strips many signals from the route)

[charland]

I started running into errors reported by TSRE on the FJ&G route I'm working on. I think this was caused by two crossings I changed from the old version and installed five track crossings. The next day I started having trouble with frozen points. I looked at the errors in TSRE and the errors said they had no J Nodes. I replaced the two switches involved and the errors went away.... for a few days and then they went from 2 to 17 errors, all claiming there were no J Nodes. I removed the two sets of five track crossings, then ran a TDB rebuild using MSTS Route Editor. All the errors went away. That was two weeks ago, I replaced the crossings in MSTS with four track crossings that work for the most part and haven't had a relaspe of the J Node errors.

Paul :-)

[eric]

I know there were some issues with multiple JNode entries in some versions. Haven't seen it happening in v8.005.

[charland]

Hi Eric, these were "No Jnode" found errors. I was able to do a TDB rebuild in MSTS with no problems until I changed the two five track crossings in Fonda in TSRE. The next time I was in the yard I found a couple of frozen points and when I checked in TSRE they were listed in the error messages. I replaced the two switches and the errors went away. A day later while running a train I noticed the base of one of the crossing was missing. TSRE then said there was 11 no Jnode errors. I checked in TSRE v0.7.012 and it listed 17. I wasn't able to open the route and do a TDB rebuild in MSTS, it would just crash to desktop. Finally removed the two five track crossing signals, TSRE vo.7 still showed the 17 errors. I open and ran a TDB rebuild in MSTS, visited all tiles. Opened the route in TSRE 0.7 and all the errors were gone.

Not sure what problem with 5 track crossings created but screw up the TDB somehow.

Paul :-)

[kasik]

Geepster I don't use Autofix because I read some topics that it can mess with the TDB.

[rdayt]

If you still have the original download if autofix messes up you can just reinstall.

Randy