Hello, okay so this might be my last question that I might have for now (I hope) maybe until days and days later and forgive me again if this topic is not related to this channel, not sure again where to ask this question. Does anyone here possibly know of any good MSTS/Open Rails Cab interior of an AC4400CW that I could install and use from the library here, to put it on a SLI CSX AC44 Locomotive Engine from TrainSimulations that would work properly?
I recently installed the MSTS SHR GE Safety2 Cab and I followed everything of what was said in the readme file, in which some of the instructions were this:
COPY the gui_fnts.dat file to .../Microsoft Games/Train Simulator/GUI.
1. Always backup all files before you edit them!
2. Unzip this file to the drive where MSTS is located (normally drive C). This will create the directory
x:\Program Files\Microsoft Games\Train Simulator\TRAINS\TRAINSET\SHR.CABS\GE-SAFE2-CAB
where “x:\” is the drive where MSTS is located.
Then to copy whatever the cab files list of your choosing and copy it into the cabview folder of the engine you want to use this cabview in.
Then to edit the Cabview name and put in the Cabview name that you chose and then add the line Combined_Control ( 0 1 0.5 0.5 throttle dynamic )
6. Since this cab uses the combined control stand Look and add for the following lines(*).
Though, for the GUI, I didn't have a folder of that in my profile where I have all the basics of Global, Trains, Routes, and Sound and stuff, and so I just made a GUI folder and added it to the list of folders I had. So, once I did all that and again, I made sure I followed everything, I went into the Open Rails game and ran route, but once I was in the game, well....I couldn't see the Cab interior. Basically, it was invisible to me and all I could see was the world of the route that was in front of me, basically when you press the 7,6, or 8 key and you get that camera view of you, first person, in front of the train as if you're outside in the front of the train.
Therefore, can anyone help me with this or know what I might hvae did wrong, and or if anyone knows of any good cab interiors that would work great and perfect for a AC44? Because I am sure I did everything right, except for that GUI thing maybe...I don't know. Thanks in advance, and all advices are appreciated.
I recently installed the MSTS SHR GE Safety2 Cab and I followed everything of what was said in the readme file, in which some of the instructions were this:
COPY the gui_fnts.dat file to .../Microsoft Games/Train Simulator/GUI.
1. Always backup all files before you edit them!
2. Unzip this file to the drive where MSTS is located (normally drive C). This will create the directory
x:\Program Files\Microsoft Games\Train Simulator\TRAINS\TRAINSET\SHR.CABS\GE-SAFE2-CAB
where “x:\” is the drive where MSTS is located.
Then to copy whatever the cab files list of your choosing and copy it into the cabview folder of the engine you want to use this cabview in.
Then to edit the Cabview name and put in the Cabview name that you chose and then add the line Combined_Control ( 0 1 0.5 0.5 throttle dynamic )
6. Since this cab uses the combined control stand Look and add for the following lines(*).
Though, for the GUI, I didn't have a folder of that in my profile where I have all the basics of Global, Trains, Routes, and Sound and stuff, and so I just made a GUI folder and added it to the list of folders I had. So, once I did all that and again, I made sure I followed everything, I went into the Open Rails game and ran route, but once I was in the game, well....I couldn't see the Cab interior. Basically, it was invisible to me and all I could see was the world of the route that was in front of me, basically when you press the 7,6, or 8 key and you get that camera view of you, first person, in front of the train as if you're outside in the front of the train.
Therefore, can anyone help me with this or know what I might hvae did wrong, and or if anyone knows of any good cab interiors that would work great and perfect for a AC44? Because I am sure I did everything right, except for that GUI thing maybe...I don't know. Thanks in advance, and all advices are appreciated.
Comment