Train Simulations MRL Mullan Pass Available!

[Curt C]

Thanks for the update, Sean. Any SP route would be a great addition imo, but particularly the Shasta Division!

[R. Steele]

With Mullan out, my next plan is an 90's SP Shasta route. Once the dust has settled a bit more on Mullan's release, I will possibly make a post formally introducing that.

ThumbsUp_Big.jpg

[R. Steele]

Hi Derek,

Are you using the Ctrl-F6 (I believe) command to toggle on track names in the yards?

Shift + Ctrl-F6 will cycle through the siding and platform name selections. Shift + any hud key will cycle through HUDs.

[deltapooh]

Does this have a lot of railroad crossings, or is it like other Streamline/Trainsimulation routes, great but can become repetitive?

[deltapooh]

I don't mean to be harsh. I really like Trainsimulation and own a ton of their products. Its just watching out for crossings tend to keep me aware when I am going uphill at 22mph on Notch 8.

[plethaus21]

I don't mean to be harsh. I really like Trainsimulation and own a ton of their products. Its just watching out for crossings tend to keep me aware when I am going uphill at 22mph on Notch 8.

I would imagine there are about as many crossings as the real route has.

[seagoon]

..........have you tried the Monogame version? You can use ReShade with it, another improvement in graphics....

I'm buggered if I can get that to work with OR. I've tried all suggestions, without any luck.
(Currently running this version $Revision: 4315 Rev. 4$ )

[R. Steele]

I'm buggered if I can get that to work with OR. I've tried all suggestions, without any luck.
(Currently running this version $Revision: 4315 Rev. 4$ )

ReShade was not added to MG until later versions, I don't remember exactly which revision. The other thing is that the latest version of reshade will not work, you need to use earlier versions.

Here's Carlo's MG release site... http://www.interazioni-educative.it/Downloads/index.php

I'm running Rev55 with ReShade 4.3.0.563 >>> here's a link for a version of ReShade that does work with MG

https://reshade.me/downloads/ReShade_Setup_4.3.0.exe

[seagoon]

Thanks, Gerry.
I downloaded the older version of Reshade and all is now working.

[seagoon]

Bought Mullan Pass this morning, downloaded, installed and I consider it worth every Australian cent....and there were almost 700 of them!!

A great job, you blokes.

[tarrant75]

Bought Mullan Pass this morning, downloaded, installed and I consider it worth every Australian cent....and there were almost 700 of them!!

A great job, you blokes.

It was only $7.00 AUD?????

[rdayt]

It was only $7.00 AUD?????

That's only $4.20 in US dollars.
I can afford that.

Randy

[R. Steele]

Someone's math is wrong --- listed on the TS website as $34.99 USD

[seagoon]

It was only $7.00 AUD?????

Whoopsie!! I omitted a zero!! Sorry about that.

[seagoon]

Someone's math is wrong --- listed on the TS website as $34.99 USD

Typo, Gerry. I just omitted a zero and couldn't edit it to do the correction.