wilst there is a little more work to do on the Swift & RL combination i finished the 3rd stack for this set a twin Estes stack, did this one purely because i found a pic of one carrying flammable gas with the appropriate Hazard Placard in place. once the Swift + RL is done and dusted this project will be ready to upload.
Back to the Swift door end this morning, progress shown below, in order to get the name graphics i had to take the name off of the corrugated side and then get rid of the panel lines with a spraygun to get one as all the pics i could find on line were of the newer logo, just could not find one useable one i could use, there is literally almost 3 hours work to get the name onto the end.
Honestly not sure which version this logo is, but I did it for Photoshop about 15 years ago. I can send it if you would like it
thanks for the offer, it was this one the older one and as seen in in the pic above and below, although tedius i had managed to do it. my skills with graphics programs is not as good as many of you but i have my ways to get where i need to be, i just need photos to work from and your logo was the newer one with tons of pics online but the best one i could find of the older one was a shot of it in almost the dark and covered with dirt as the container was filthy and unusable, its not the first time i have had to take the logo from the corrugated side and spray out the corrugations.
I have Photoshop CS2 but its to complicated for me, i still do all of my work in Photosuite 8.05 which was made for Windows 95 and everyone has seen what i can do with it.
Bernard, Looking in the library and trying to redownload some items, I noticed ORTS/MSTS Sulphuric Acid Tanks (Option 1) and ORTS/MSTS Sulphuric Acid Tanks (Option 2)
Are not available for download. Is this a mess up, or a reason as to why? Thanks!
Bernard, Looking in the library and trying to redownload some items, I noticed ORTS/MSTS Sulphuric Acid Tanks (Option 1) and ORTS/MSTS Sulphuric Acid Tanks (Option 2)
Are not available for download. Is this a mess up, or a reason as to why? Thanks!
Shawn, i just went over to them and you are right, i opened them up to edit and could not find anything wrong with them, i think Eric may need to look at them as they did download before after uploading.
MY UPLOAD PROJECT NUMBER 225 (Mixed containers Pt2) STARTS BELOW
this time it will be 5 different containers on a 5 Unit Spine car set, the containers will be the ones shown below (only the side you can see is done so far) leaving the final 4 containers i have pics for to form the last project for a while to have containers in it (must admit to being slightly tired of containers just at the present)
Bernard, Looking in the library and trying to redownload some items, I noticed ORTS/MSTS Sulphuric Acid Tanks (Option 1) and ORTS/MSTS Sulphuric Acid Tanks (Option 2)
Are not available for download. Is this a mess up, or a reason as to why? Thanks!
Shawn, i had another look at the 2 downloads in edit mode and noticed that although all the contents were listed the actual size of the zip file was 0 bytes, so i found the 2 zips in my backups and reuploaded them in edit mode had to change the file names by putting a underscore in between the word option and the 1 or 2 as i have found in the past that the library will not allow a replacement file of the same name to replace one already there, but they are now available again the same File ID nos 88163 and 88164.
Processor: Intel 13th Gen i5-13400F, - Mobo: MSI PRO Z790-P, - OS: Win 11 Prof 64bit. - Memory: Corsair Vengeance 64GB Ram, - Graphics MSI RTX 4060 Ventus 2x Black OC 8GB, - Sound: Asus STRIX SOAR Gaming Soundcard, - Storage: 7TB SSD's. - Case: BeQuiet! Pure Base 500 Black.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We do not share information about our users with anyone. For additional details, refer to our Privacy Policy.
By clicking "I UNDERSTAND" below, you consent to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment