Whatever's Locomotive Reskins

[Whatever2006]

Coming soon to the TrainSim File Library near you...?
SFCAN043.png

[Whatever2006]

Poof, another Union Pacific GP60 has appeared!
Screenshot 2026-02-08 144127.png
It's my first attempt in doing a UP renumber and I have a font that's resembles the typeface for the cab side and rear end. With the help of CB&QSD24, Parker and Grigggs, I was able to do UP 1900, now this version is different from the actual UP 1900 (which is now under a different number, again) due to it being in DRGW colors at the time.

[eric]

Nice having those around for local jobs.

Sent from my SM-S911U using Tapatalk

[Whatever2006]

Nice having those around for local jobs.

I can't be sure about running the UP GP60s on that, at least on my end aside from running intermodal and piggyback trains. I could but I need to get a idea with the topology of Green River since it's the only route (more in the industry side?) I have for running DRGW and UP trains.

[Whatever2006]

One additional SD70M which happened to be one of the three from the UP Wind Turbine train set.
UP_SD70M_4348.png

[BrandonS261]

Some great stuff here! Thanks for all of the hard work and releasing it for all of us to enjoy.

[Whatever2006]

BrandonS261 Thanks Brandon, I think I'm doing alright with what I do in terms for basic renumbering. Nothing too special with what I'm doing aside from what I do is kinda mediocre.

[Whatever2006]

One additional SD70M which happened to be one of the three from the UP Wind Turbine train set.
UP_SD70M_4348.png

It starts with... one thing, I don't know why, that I did UP 4348 again but on Nash's SD70M model that he and Brody are working on their own UP set.
Open Rails 2026-03-07 11-45-31.png

No plans for release for the model and paint kit I received from Brody for now as the base set that he and Nash are working on has yet to be released (TBD)...

[Whatever2006]

I went around into doing ATSF 5012 in its as-built form as an SD40 prior to its rebuild as an SD40u. I just used the numberless blank patch and the number placement from the SD40u into the SD40.
image-23.png image-19.png

I needed another Santa Fe SD40 to go with the 3 SD40s that I currently have for a piggyback train I wanted to run.

I still got other stuff to finish or at least I'm trying to... But I suppose I can give myself the bad order card and cease doing any more renumberings for the foreseeable future if I wanted to when I get my existing backlog sorted...or not.
ATSF_BAD_ORDER.jpg

[Whatever2006]

I got my boredom and a random thought of doing another NS GP60, so I did 7142 after watching an video of it on Instagram. I did two versions of it, one without the striping and the other with the striping.
Screenshot 2026-06-03 132253.png
Screenshot 2026-06-03 162016.png
After looking at the prototypical photos, NS 7142 during its operational life from the late 1990s to the 2000s, it didn't have a white sill until some time in the 2010s when it eventually receives it. The sill striping on 7142 isn't prototypical but I included it because I wanted to.

[anderson martins]

Whatever's Locomotive Reskins

[Whatever2006]

Something related to the UP GP60s, whilst I infrequently post on this thread, I did work on 2 other GP60s, UP 2085 and UP 1902.

I wasn't happy with how I did the numbers myself, so I decide to redo one of them, UP 2085 and the result is much better than the previous one I did.
Open_Rails_NewYear_MG_2026-07-08_03-05-04.png
I could say I'm doing some UP renumbers of the GP60s from TrainSimulations' Shasta as UP 2085 is formally SP 9786, the same is said for UP 1902, formally DRGW 3156, though it was renumbered to UP 5702 before reaching its final number. There's the other two I haven't yet covered, but that's for another time.

Ugh, if only my mouse is with me so I can continue with my Open Rails stuff, but alas, its sensor decides to give out on me which isn't fun and using a touchpad is awkward for me to use (I'm using a laptop).

[geepster775]

UP GP60 1902 (Ex DRGW 3156) does not have the recessed handbrake. The shape used for the TS version of DRGW 3156 is correct, but the texture has a recessed handbrake drop shadow area similar to the SP 9700s. I redid the texture for 3156 handbrake area.

[Whatever2006]

UP GP60 1902 (Ex DRGW 3156) does not have the recessed handbrake. The shape used for the TS version of DRGW 3156 is correct, but the texture has a recessed handbrake drop shadow area similar to the SP 9700s.

Well, that's going to be a foul for me, but since I don't have Shasta, I can't do much about the shape. I suppose I can try to modify the textures and hand off said textures for people who do have DRGW 3156 and SSW 9684...?

Dunno whose going to be the guinea pig in testing out a texture on a shape that I do not have. Eh, it might be a small bother detail-wise... but the stuff I'm doing isn't final yet. It will be a long road until I can finally do some units I wanna do. AHEM! ATSF 4022 (BNSF 8722), 4023, 4024 and 4038 from the old SLI ATSF GP60 pack in TSN's new ATSF GP60 model, I need an freight animation for the ATSF units to fix a flaw on the misaligned walkway on the conductor side of the locomotive as it bugs me to no end...

[geepster775]

As I said, the shape provided was correct. The issues are all with the textures for 3156.