Whatever's Locomotive Reskins

[RobGuru]

Thanks!

[Whatever2006]

ORTS_GR_DRGW_GP30_3011.png "Denver and Rio Grande Western GP30 No. 3011 in action."

[Whatever2006]

As the name of the thread says, this is where I post my renumbering reskins of certain locomotives with specific numbers.

The first locomotive in the post is DRGW SD40T-2 No. 5345, this is my first renumber reskin I did and exported on my own, the model is from Train Simulations (Streamlines)' DRGW SD40T-2 No. 5364 from the Green River route, with the Green River DRGW SD40T-2 engine upgrade from Pete Abrams and Jeff Auberpine applied. I don't have any plans on releasing it into the file library.

While it's not the first locomotive I ever did a renumber reskin, that goes to the ATSF B40-8W set that I did with the help of Unoriginal on exporting the texture files, thank you Unoriginal for assisting me there, while I wasn't able to get TGATool2A and AceIt to fully work in exporting Ace files until now.

I did DRGW 5345 because I got some inspiration on wanting to make it's appearance in Open Rails after watching C Vision Productions' Railroad Film; Denver & Rio Grande Western Vol. 2 where in the timestamp 47:58, the locomotive made its appearance, and I'm glad that I did DRGW 5345.

Overall, I will post some more stuff here once I some other things sorted out, I got some plans on doing the additional DRGW GP30s.

Feedback and constructive criticism are welcomed here, and I need to figure out on finding the number fonts that either matches or is close enough to the DRGW number fonts, I need some more practice in doing reskins for Open Rails, I'm still a newbie at it.

DRGW_SD40T-2_5345_Side_Left.png DRGW_SD40T-2_5345_Front_Left.png DRGW_SD40T-2_5345_Front_Right.png DRGW_SD40T-2_5345_Side_Right.png I redid DRGW SD40T-2 No. 5345, although everything is the same with some small differences being the sizes and adjustment of the Rio Grande Railroad's Roman Number fonts, along with the Conrail styled number board font. I also exported the ace texture files with the no alpha and alpha (no DXT1) with compression setting, and I applied some dithering on the cab side and hood side numbers on the locomotive. Honestly I'm happy with the results and it's an improvement over the first version I made.

[Whatever2006]

I will begin the reworking on the other DRGW locomotives that I did, including DRGW 3011, I will begin work on DRGW 5371 and DRGW 5401, then I will work on DRGW 3011. I could make an extra DRGW SD40T-2 but I will find what number I will choose, then continuing with the GP30s (no SD45s for now?).

[Whatever2006]

DRGW_SD40T-2_5371_Side_Left.png DRGW_SD40T-2_5371_Front_Left.png DRGW_SD40T-2_5371_Front.png DRGW_SD40T-2_5371_Front_Right.png DRGW_SD40T-2_5371_Side_Right.png I redid DRGW 5371 now with the same techniques as before with DRGW 5345.

[Whatever2006]

The additional DRGW locomotive set's status:

DRGW SD40T-2 No. 5345 - Done

DRGW SD40T-2 No. 5371 - Done

DRGW SD40T-2 No. 5401 - Done, but the textures need some reworking

DRGW GP30 No. 3011 - Done, but the textures need reworking

DRGW GP30 No. 3006 - Not done, still haven't started work on it

DRGW SD40T-2 No.XXXX - Number hasn't been decided yet, still working out on what number to use

Update: DRGW 5401's textures are reworked now and all of the three additional DRGW SD40T-2s are out in the File Library, the extra SD40T-2 will wait.

Sent from my vivo 1920 using Tapatalk

[Whatever2006]

Open Rails NewYear MG 2024-07-18 05-08-51.png Open Rails NewYear MG 2024-07-18 05-10-12.png
Here's DRGW 5345 in Open Rails New Year MonoGame (which I recently installed and did some session runs with it), I did put in the original light glow texture in the MonoGame version and then I see the issues with my headlight position settings I use on the engine file, so I decide to adjust them to be centered where the bulb of the headlights are located, then I will do a test with Nash's custom light glow textures. I thought of doing a headlight position patch for my copies of the GR DRGW diesel locomotives, I will see how it goes.

Note: I'm using NAVS' EMD 16-645E3 Engine Sound Set for DRGW 5345, I decide to give the sound set another go and this time, I tinkered with the volume settings in the SMS and see if I like how it turns out or not.

[Whatever2006]

It's been a while now, but a few things is somewhat clear for me and it's to do with working with an additional number set for the DRGW GP30s, I'm working on the blank numberless version on the Billboard Lettering variant for some ease of future renumbering. (V <- Attachment below.)



It's getting there, slowly, but there's more to come.

Work-In-Progress_DRGW_GP30_Renumber_Blank.png

Update: I eventually blanked the cab side numbers for now, I will be working on the number boards soon. (Attachment below.)

Work-In-Progress_DRGW_GP30_Renumber_Blank-2.png

[Whatever2006]

Bumping up the thread as I got some more renumberings and this time it's the Santa Fe Railway, so far I did 4 additional numbers for the C44-9W using Parker's Seligman Locomotive Texture Update V1.5, coincidentally he was also doing his ATSF C44-9W set too, and what's not a coincidence is him sending me his numberless textures of ATSF C44-9Ws #620 and #643, I'm saying my thanks to him, as for the 4 locos I worked on, here are the following:

ATSF C44-9W #600

ATSF C44-9W #611

ATSF C44-9W #626

ATSF C44-9W #630

They are done before as I made them using a numberless blank I made myself before Parker gave me his numberless blank, but I wouldn't mind doing them again-ish.

[Whatever2006]

And here's the 4 additional ATSF B40-8Ws that I did, but they are partially redone, it's a small update I given to them and they have the correct numberboard fonts after learning the specific font from the RoadGeek 2000 fonts that Parker used on his texture updates.







And here's the screenshots of the 4 C44-9Ws I mentioned above:






But that's not all, I did 2 more C44-9Ws and that's pretty much it, I don't know if I would release them as Parker is about to release his set soon, and Drew is doing the same but with using the new BNSF C44-9W models from TSN.

[Whatever2006]

It's been a while now, but a few things is somewhat clear for me and it's to do with working with an additional number set for the DRGW GP30s, I'm working on the blank numberless version on the Billboard Lettering variant for some ease of future renumbering. (V &lt;- Attachment below.)



It's getting there, slowly, but there's more to come.

Work-In-Progress_DRGW_GP30_Renumber_Blank.png

Update: I eventually blanked the cab side numbers for now, I will be working on the number boards soon. (Attachment below.)

Work-In-Progress_DRGW_GP30_Renumber_Blank-2.png

The number boards are done... I held off on doing them for ages but I got around into finishing them, I will start doing the small Lettering for the DRGW GP30 (again) eventually...

[Whatever2006]

It's been a while since I last posted here, so I will leave a few things here; I sent the updated texture files of my additional ATSF B40-8W set to Unoriginal to repackage them and update the set in TS and TSC's file libraries, one thing I didn't realize is a typo on ATSF #527's engine file inside the OpenRails folder (which is SF_8_40BW_520.eng) 🙃.

That will be sorted out alongside rolling the new textures, but anyways, I'm slowly working in making a numberless blank for the DRGW SD40T-2 with the intention of redoing the numbers for the two locos from my additional DRGW SD40T-2 set because, in my perspective, it kinda sucked... more so with the cab side numbers.

As for the DRGW GP30, I made a numberless blank for the big lettering variant but it's on the Dell Inspiron and I didn't think of transferring it to the ASUS A16, but I will get around into sorting that out eventually.

[Whatever2006]

Screenshot 2024-12-25 012736.png
Work in progress photo of the DRGW SD40T-2 numberless blank texture, the patch is visible' where the numbers is once there, eventually I apply more colors in a dithering effect to make the patch seamless with the rest of the map texture.

[Whatever2006]

It's been a while since I last posted here, so I will leave a few things here; I sent the updated texture files of my additional ATSF B40-8W set to Unoriginal to repackage them and update the set in TS and TSC's file libraries, one thing I didn't realize is a typo on ATSF #527's engine file inside the OpenRails folder (which is SF_8_40BW_520.eng) 🙃.

The update has been rolled out now, you can download the updated set here: https://www.trainsim.com/forums/file...leid?fid=88799

[spoony1999]

Can I politely say that the picture of the cars at the end of every post is distracting and not really needed