Showcasing Upcoming BEW & Jeff Auberpine uploads

[geepster775]

The only thing is Jeff made the sulfur cars based on the corn cars before we had a proper smaller-diameter tank car that came with the Ruel route. There was some imagineering going on because at the time they were the only short length tanks available from TS.

Molten Sulfur is usually UN 2448, and since the cars are pretty much captive to the service, some paint the 2448 on the car rather than rely on the flip card placard

These 2448 cars came with the Bala route

[burgerbern]

Molten Sulfur cars are a pleasure to have in the sim world. Haven't seen many of those. Haven't really seen many acid cars either.

Just a quick question. Are the placards labeled 1830 or 1832? (acid cars)

Apparently 1832 is spent sulfuric acid, while 1830 is regular sulfuric acid. Had zero idea there was a difference until I started seeing both be shipped.

the cars are labelled 1830 and the Molton Suphur ones as geepster775 said are labelled by Jeff like the picture in that post, but i looked them up online and they also had the 2448 placard so i added it to them. as Geepster775 stated the Ruel sub car is the right shape for the sulphur cars and i did try to adapt Jeffs textures to fit that car but unfortunately it cannot be done as the textures end up stretched, so i will release them on the same shape as the corn cars.

Sulphuric_Acid_Tanks.jpg
TILX_Sulphur Cars.jpg

[qballbandit]

Very nice, thanks so much!!

[CSRX]

Bernard, thanks for that info! I knew of the sulphur cars having their tags of 2448, used to switch them a lot when I worked in Whitehall Yard. Both mills in Glens Falls and Ticonderoga took them.

Very rarely I see them now. Mostly just sulfuric acid going in to Saint John, and spend sulfuric acid cars coming out.

[jasonjedi1]

Those tank cars are awesome!

[burgerbern]

The Corn Syrup cars have been uploaded awaiting approval

[Timbit]

Bernard,
These cars are beautiful, thank you for taking the time and uploading them for others.
Tim

[Fish4890]

im sure these will work with the CGTX_70440 Acid Tanker iirc from a CP or the CN Ruel Sub

[UnionPacificGP60#1050]

Dont have the Chessie System Set nor the Discontinued Mactier Trainset Bec Trainsimulations Removed it For the Corn Tanks CGTX_17113_CORNTANK.s Dont have that at all nor STSX shape either

https://www.trainsimulations.net/cp-mactier-route it may not appear on the website but it is still available to purchase from, as long as they have the link.

[burgerbern]

im sure these will work with the CGTX_70440 Acid Tanker iirc from a CP or the CN Ruel Sub

I am sorry but that one will not work, although at first glance it looks similar the actual tank sides part is different. On the files i say you need to use the tanks sides are 2 complete sides on the ace file. On the one you mention the sides is just one split in half , i did try to alter the ace file to suit that shape but all you get is a mess.

[burgerbern]

Finally got the Molten Sulphur cars uploaded so should become available when approved

[CSRX]

Finally got the Molten Sulphur cars uploaded so should become available when approved

Man, so many goodies have come out this week!

"Just when I thought I was out, they pull me back in!"

[eric]

They're up.

[burgerbern]

Something new, had a go at the NAVS_Flatcar-GS-Type-53-6 Paint Kit to produce a set of 4 CBQ Bulkhead flats as per the pic below, at the moment preparing the readme files for a beta test

CBQ_So_Far.jpg

CBQ_Bulkheads.jpg

[marklester01]

Almost like Robert's!