Showcasing Upcoming BEW & Jeff Auberpine uploads

[burgerbern]

Just started this thread to showcase forthcoming uploads from BEW (burgerbern) and uploads on behalf of Jeff Auberpine. no firm dates for uploading just when i get time from being my wife's full time carer duties

so to start off Jeff snt me these NS Topgon repaints a long while ago with two different FA's one to add ribs and brake rigging to the underbelly as seen on many pics and one to add just the brake rigging that some series of Topgons had without the underbelly ribs

Topgon1.jpg


The above 3 have both underbelly ribs and brake rigging


will endevour to get readme's done as soon as possible and beta testing before uploading

[CSRX]

Was just looking for some NS coal cars to run on the Clinch Valley again. These look fantastic!;

[burgerbern]

The NS Top gons have been uploaded, awaiting approval, You will need the now unavailable SLI/TS Norfolk Southern Horseshoe Curve Trainset for the shape files/sound etc,

[burgerbern]

another set of engines i found that were sent to me by Jeff are these HCLX_SD40M3's based on Danny's give away BN_SD45_6476 shape and textures with custom FA and cabview by Jeff, just need to assemble the pack properly for uploading and get it beta tested, then that can be uploaded here

HCLX_SD40M-3.jpg

[mword77]

Textures make the model and Jeff's work is top notch! Thanks again for all of these.

[SD40-2]

Nice! Leasers aren't exact common in the OR world, so it's very nice to get some quality units.

[burgerbern]

Have not forgotten the HLCX units, just my wife has been in hospital for 5 weeks with complications and now she is home is needing a lot more care for a while while she recovers, so will try to get back to them soon.

[lineman]

AS you know family comes first, hobbies can be done any time. Hope all goes well for you and yours.

[burgerbern]

The HCLX units are with the beta tester for a second test, found some issues first time hopefully now sorted out, so should not be to long now.

[burgerbern]

i have found a set of 18 19k gall tankcar repaints that Jeff Auberpine sent me before 2019, after an extensive search this morning to find out where the shape file came from (as i lost the emails from that era when i had a major PC Crash at the end of 2019 in which he would have told me what to use) i found it in just 3 SLI sets 2 from 2013 which are no longer available which were the CP GP9u Trainset and the CP Mactier Trainset the shape was from the CGTX_17113 Corn Tank in those sets and in the Chessie System Trainpack recently released where there are 3 shapes STSX_1589, STSX_2960 & STSX_4075, so one of those 3 sets will be needed for the shapes. any way some pics


Corn Tanks JA.jpg



will get these sorted for release after the leasors are in the library

[burgerbern]

The HCLX leasors have been uploaded ad are awaiting approval. Please note the custom Cabviews included will need one of the older SLI sets for the additional files as Danny's freeware offerings did not come with cabviews, so the provided links for freeware cab will get everybody running, but if you have one of the SLI sets in the readme file you will be able to use the Jeff produced custom views, of which there are 2 one with a digital speedo and one with an analog speedo.

[burgerbern]

Found another couple of Jeff's repaints that he sent to me which i will deal with after the tank cars are uploaded the first is a BN GP30 based on an SLI shape (Not sure which one yet as the emails from Jeff for the period before Dec 2019 are lost where he would have told me which shape i needed) but I will work it out before upload. I suspect it will be one of the early SLI ATSF packs or routes.

BN_GP30_JA.jpg

and a GP39M probably on the same shape (both have Jeff's FA's to make them correct)

BN_GP39M_JA.jpg

[Fish4890]

issue with the HLCX SD40M-3

Idk if the Brakewheel is suposed to be Gray

[Timbit]

Fish4890,
Maybe a private message to Bernard, would be better as this is the reason that people stop doing things for others .
Just my 2cents
Tim

[eric]

With leasers, is there really any such thing as wrong?