Possible 2023 releases

[BNrailfan]

Fantastic job

[CSRX]

Thank you all for the kind compliments. As I did mention, some of these are ready to be released, while others still need a bit of work, and at the moment I haven't had the chance to fine tune everything. Most of what I have shown off, has actually been sitting on my computer since January.

Those Boxcars Who Actuallu Owns them? Like The ATW One also says BNSF( Ex-BNSF? ). The Other's CRLE but Leased to NBSR,Right? And, The Well-Cars are TS-SLI?

The ATW boxcars are ex BNSF. Some of the logos are patched out, some are just faded enough that a patch wasn't warranted.
The CRLE boxcars are currently on lease to NBSR.

Hi Shawn,

Those look amazing!

I really like the CPR SD unit.

I hope you can find some use for those CPR SD40-2 slugs I sent?

I'd love to see them finished and roaming the rails!

Thanks.

Robert

Robert, I haven't had the chance to take a look at those you have sent me. As I mentioned, I haven't done much paint wise lately, and these are something I've had collecting. The autoracks are something I did quickly the other night.

To be honest, I've felt pretty burnt out when it comes to any paint work or model work for awhile. I did spark some interest when it came to building the Mattawamkeag Sub line, however, it hasn't been much to keep me focused on projects. For example, the container sets, were to be much larger, and include many more containers, but I got burnt out.

The downside is now, going through each file and adding instructions and readme files to them, for proper installation, and yes, you guessed it. Most of the file will require you to have the Trainsimulations Mullan Pass route.

[qballbandit]

Really liking the Blue GP40's and the containers. Great work, Shawn - thank you!

[phydeaux]

Wow Shawn, you really outdid yourself on these beauties. If I had a fraction of your abilities, I'd be a happy man. Thank you for showing them to us and thank you for whatever you plan on releasing. What ever you chose to release will be greatly appreciated.

Larry

(Not to be a gimme pig, but it sure would be nice to see some graffiti covered freight cars.)

[rrdiesel87]

Some great work Shawn! Put out what your willing to, the more the merrier!

[dnewmanjr]

Awesome work, Shawn. Looking forward to some of these in the library very soon! But take your time on these freight sets.

[CSRX]

Folks,
I will focus on the GMTX GP40-2's and get those released. Those seem to be pretty popular by the feedback on here. I'll also release the BNSF and MRL units. I may add a few more numbers to the MRL units first, that way the more the better for future activities on the Mullan.

I also would like to release this unit, as well as a couple others. Granted it's fictional and there currently isn't a route available for them to run on, as the WMRC operates the former Maine Central Mountain Division line, but, this unit is dedicated to a co-worker that recently passed. It's the best way to continue his memory and legacy in the railroad world.


I have a couple more dedicated units I may add into the mix.
The paint work on these units were done by Brody Wyrick, and I do have his full permission to release them on here.

Lastly, these items probably won't be released all as once as a mega pack like before. I think this time around I am going to finish and release what I can when I can, with possibilities of adding a few more cars or engines to the initial releases. I think the issue I had with the big packs is, pushing myself to finish them, package them, and release them, to the point of burning myself out.

[lineman]

As always, life before train-sim. Your work and generosity are top notch!!

[CSRX]

As always, life before train-sim. Your work and generosity are top notch!!

That is true, however, there will always be goals in ORTS I would like to achieve, and at the age of 34, I'd like to finish off some of those goals before I call it quits for good. I say that, because the co-worker that recently passed, was only 48 years old. He achieved a lot of goals in his life, but still too young to be gone already. He will be deeply missed in the railroad community in New England.



So, I noticed the other day when I booted up the BNSF Seligman Sub route, that I had a pair of BNSF GP40M's. With that, I was able to snag the nose off one of the units, to finish, edit, and tweak the GMTX GP40N units. Now, the only thing left is a small mapping issue on the engineers side (the panel next to the steps, fully blue versus black, but if I paint it black, then the conductors side would be incorrect. To me, I don't care, majority of the time I spend inside the cab anyways. 3052 has nose headlights, so that one may get kicked to the side for now. The other thing, front ditch lights don't match the real units. Which again, I don't care too much on this. These adjustments would require some shape editing and freight animation, but to be fair, I have zero interest in doing those. I burnt myself out on that a long time ago when I did those GMTX GP38-2's..

As I mentioned, some of these units came with RDMT units paired with them, However it appears they would need some work. They had an odd number board section above the windows. These too would require some F/A and shape editing as well.. so maybe I'll turn these away..

http://www.rrpicturearchives.net/showPicture.aspx?id=5102530

http://www.rrpicturearchives.net/showPicture.aspx?id=4735321

The finished nose: (looks like I need to paint the A/C units black)

[CSRX]

Well, I ended up doing the 955, 958 and 959 units as well, and the final touches to the 3050, 3501 and 3055.
I didn't edit the engine files to the 900 units except remove the smoke to make them look like they actually are RDMT's. On my end I did set up the sounds to basically give off everything except the prime mover sounds, however this will be up to the end user.

These should be ready to be uploaded this week.

[qballbandit]

Niiiiiiiiiice!!!!

[CSRX]

Niiiiiiiiiice!!!!

Thanks!
The GP40N/RDMT set SHOULD be available by tomorrow, as I have just finished the upload. Now to finish up some of the other files..

[CSRX]

The BNSF D9-44CW's and the single MRL SD40-2XR have been uploaded to the library.

[eric]

And they've been approved as well.... Thank you Shawn for testing our super secret new feature that he broke on the first try.

[CSRX]

And they've been approved as well.... Thank you Shawn for testing our super secret new feature that he broke on the first try.

That's what I'm good at! I keep the car knockers pretty busy at work too.