STUCK AGAIN Please?

[slipperman]

Hi Paul,
There's no point trying something else, mate!
In the as-supplied activity, there is NO oncoming steam train. The only train travelling towards Chester after the Player has left is the Class 45 which we delayed by changing its MaxVelocity. The fact that you've changed the Player loco makes no difference - you MUST have made some other change/s.

Cheers,
Ged

[pcohen]

Well Ged, you are certainly not going to believe this.

I changed my Player Loco to 70000 "Britannia" and It seems to have duplicated itself.

Having done the same Loco change to 70013 "Oliver Cromwell" again for some reason it has duplicated itself again.

I have been Using alternative Stock In some Activities for a good few year now with no problems. OpenRailsLog.zip

No answer to this One.

thanks

Paul.

P.S. in reply to your last Post, I have not made any changes at all, apart from the Loco, but have the Identical Train coming towards me.

[slipperman]

Hi Paul,
What do you mean "duplicated itself" ? Do you mean in the Player consist or some other one?

If the Britannia is coming TOWARDS you, that is not duplication - to do that, you'd need to create a new service!

To change your Player loco, you only need to edit its consist, in this case, it's ynysmonexpress.con

I cannot imagine what the cause of this problem is without seeing the files - can you zip up the nwce.act and ynysmonexpress.con files and attach them to your next post, please.

Cheers,
Ged

[pcohen]

Hi Ged, hope this is what you required. 1A66.zip OpenRailsLog.zip OpenRailsLog (2).zip

Sorry to be a nuisance with this, can only be done by me.

Thanks

Paul.

[slipperman]

Hi Paul,
No, sorry, that is not right!
You have sent me the 1A66.act file, NOT the 1A66.con file.
I also asked for the nwce.act file.
You have sent me two OR logs and this is where I think you are confusing yourself as well as all of us!!
It's a bit of a mess!!
You appear to have TWO routes in : C:\nwc2_MiniRoute\North Wales Coast v2\ROUTES
One is NWCoast and the other is North Wales Coast v2.
As installed, it should be called NWCoast, so why you have got one called North Wales Coast v2 I can only guess that it's because you mis-read my instruction E. in post #12 - that ONLY referred to the Open Rails installations list, NOT its actual folder name. As part of the same mistake, you seem to have renamed Train Simulator as North Wales Coast v2 - WHY?
Route NWCoast also appears to be missing its DynaTrax entries.

I could spend all night writing instructions on how to sort it out, but I'm not going to because I could miss something then it'd be a bigger mess!
With respect, I suggest that you delete folder C:\nwc2_MiniRoute completely and re-install the route, THEN follow my instructions in post #12

Cheers,
Ged

[pcohen]

apologies Ged, hope I have these right this time nwce.zip 1A66.zip

Regarding the nwc2_MiniRoute Installation:-

Your quote from Post 12 "E. You will see that the 'Route' box contains 'Train Simulator' - change this to something like 'North Wales Coast v2"

Thanks

Paul.

[slipperman]

Hi Paul,
Thank you for the files - the .act file matches the original so I've no idea how or why you had an approaching steam train!

Your quote from Post 12 "E. You will see that the 'Route' box contains 'Train Simulator' - change this to something like 'North Wales Coast v2"

EXACTLY, mate, it says change the entry in the 'Route' box, NOT change the folder name.

Since it's such a mess, you would do much better to scrap what you've got and re-install the route as per my previous message.

Cheers,
Ged

[pcohen]

Good Morning Ged. still having some Issues.

This is now Working and at Chester station waiting to depart, Message not seen before:-

"Passenger boarding completed waiting for signal ahead to clear"

Auto Pilot still not working and their Is a steam Engine approaching again,
although I cannot move forward far enough to Identify.

Assuming it is a copy of my Loco as before?

Log File Attached OpenRailsLog.zip

Many thanks again

Paul.

[pcohen]

Hello again Ged. apologies this Is now working almost correctly.

Forgot to change Maximum Velocity values. Offending Loco now moved further back .

However, I have managed to lose the Train/Cabview Sound.

Thanks

Paul.

[pcohen]

Hello Ged.

North wales Coast Now working correctly as it should.

I have saved the Route to my External hard Drive to Avoid problems In the future>

Thanks again for all the help.

Paul.

[pcohen]

Hello again Ged.

Her Is the log File for North Wales Coast Run i have just Completed.

Still the occasional Missing Tracks and Scenery.

Attached Log File OpenRailsLog.zip

Many thanks

Paul.

[eric]

Glad to see its getting sorted out, Paul.

[pcohen]

Hi Eric, thanks for that..

Paul.

[slipperman]

Good Afternoon, Paul,
I, too, am pleased that you've got the North Wales Coast v2 working!

As I mentioned before, I think the 'disappearing graphics' are as a result of some mismatch between your PC and TV/Monitor.

Within the route, there are a large number of errors, many of them concerning sounds. Two years ago, I created a pack to correct those errors but didn't release it. If you are interested, I can let you have it.

Cheers,
Ged

[pcohen]

Hi Ged.

Many thanks for checking the Route.

Yes please to the Error pack.

At least finally I seem to be getting somewhere?

many thanks

Paul.