Problems with RFP3

[UP6706]

There's a consist called CSX empty garbage train, and it says I am missing TILX_1247_MT and TILX_1226_MT when I have the ones that have TLAX in their names, And not all track sections get replaced by US Tracks when I replace the tracks. Screenshot 2026-10-26 104854.png Screenshot 2026-10-25 151756.png Screenshot 2026-10-25 151810.png Screenshot 2026-10-25 151856.png

[frliss]

UP6706

DAAAA. In your screenshots which is the US Tracks? The gray tracks or the slightly yellowed tracks. I haven't the foggiest notion of which is wich.

Fred

[UP6706]

The yellowish ones, Fred.

[oper190]

By shape I'm saying the track with the grayer ties is US Track, the other most likely could be dynamic pieces. Therefore you need the Profile for Dynamic track in the US Tracks to place in the route folder.

Try this: https://trainsim.com/forums/filelib-...leid?fid=88555

[UP6706]

I've downloaded that file.

[wmuzeke]

For the trash cars, they are in tlaxtrashcar2-pack.zip (File ID 77164).

[bandorr2000]

Search TLAX for the trash cars

[eric]

I've downloaded that file.

Yes, but have you installed the correct dynamic track profile needed? Show us a screenshot of your RFP3 route directory structure and the content of the TrackProfile folder.

It's this: https://trainsim.com/forums/filelib-...leid?fid=88619

[UP6706]

That too, I put that trackprofile from File ID 88619 in the trackprofiles folder, the tracks that use ACleantrack textures still appear, there's still the problem, So I think there are tracks only included in XTracks that don't have USTracks replacements.

[Polina]

consist file has the wrong car names
the cars should be TLAX_1247_MT & TLAX_1226_MT instead of TILX_1247_MT & TILX_1226_MT
hope this helps

[derekmorton]

I went the other way and made a copy of the wag file and renamed it to match the consist.
That way I have both file names in case another consist calls the correct name.

[oper190]

the tracks that use ACleantrack textures still appear, there's still the problem, So I think there are tracks only included in XTracks that don't have USTracks replacements.

Not sure about USTracks not having all the shapes of XTracks, but the route was built using XTracks . I suggest trying the replacement ATracks, they look more like USTracks than the default Xtracks and have all the track pieces, also have to update the trackprofile to the one for ATracks.

[UP6706]

I used to have ATracks on this route, but I decided to switch to USTracks.

[eric]

and now you're surprised it doesn't completely work?...

Where did you see those tracks you were concerned about? What tile or station location?

If you used v8.00x, check your TSRE directory for a RFP_trackUsed.txt file --- if'll list all the shapes used, and if you did the replacement correctly, you'll see if there are some A1T or A2T shapes left or not. I'm still of the opinion it's dynamic track and you didn't do the track profile correctly.

[UP6706]

I don't have that version, But I have TSRE GenX.