Running the Utah Belt Line

Collapse
This thread is discussing the following file:

Open Rails Route -- Utah Belt Middle Division V1.0 Part1

File date: 2026-06-19
Downloads: 474

>> Download Now <<

X
 
  • Time
  • Show
Clear All
new posts
  • eric
    9500 Post Veteran and Administrator



    • Dec 2002
    • 9587
    • NS MP245.4 CNO&TP South District
    • English, SQL
    • General

    #31
    Really enjoying the realism...

    Open Rails 2026-06-22 08-45-49.png
    Open Rails 2026-06-22 08-37-58.png
    If you like what you see here at Trainsim.com, be it the discussions and knowledge in the forums, or items available in our library, I hope you'll consider a paid membership to help support keeping the site operating.... Thanks!

    Comment

    • niknak
      1000 Post Veteran


      • Nov 1999
      • 1254
      • UK.
      • MSOR

      #32
      Originally posted by slipperman
      Hi Nick,
      Here's a link to v8.006k : https://trainsim.com/forums/filedata/fetch?id=2347768

      Cheers,
      Ged
      Hi Ged,

      Hope you're well . Yes that latest version is a little better thank you (and Eric). I can now zoom around a little without TSRE locking up immediately although that does happen after a while. I guess that's due to the dds tertex files as Darkhorse mentioned in an earlier post.
      This route reminds me strongly of a TrainSimulations route.
      Last edited by niknak; 06-23-2026, 04:58.
      Regards,

      Nick

      ( ' boffin0_reprised ' on TikTok )




      Cyberpower Desktop with AMD Ryzen 5 CPU /. 16GB RAM /. ATI AMD Radeon RX6700 12GB graphics /. Windows 11 Home 64bit /. RailDriver /. Partridge in a pear tree....​

      Comment

      • niknak
        1000 Post Veteran


        • Nov 1999
        • 1254
        • UK.
        • MSOR

        #33
        Originally posted by adreid

        Two of the activities require an OpenRails folder within the Activities folder ("activity extensions"). Apparently, that folder is missing from the installation files.

        The absence of that folder will also have a detrimental effect on the "MOW Snow Plowing" activity.

        Here is the required folder:

        [ATTACH]n2348154[/ATTACH]

        Nick,

        Thanks for reporting this issue. You might be able to restart the activity from a save file taken before arrival at Santa Fe, rather than re-running the activity from the beginning.

        Regards,
        Dan

        P.S. AI trains are released when you perform certain actions -- be certain items in the F1 workorders are marked "DONE" when you couple/uncouple rail cars.
        Hi Dan,

        I have installed the missing folder you kindly provided which at least means that when I go to run around the consist at Santa Fe the signal is now green and I get a popup regarding Medhusa Cement. However the only DONE message I get on F1 is when I drop off the caboose. I don't get a DONE when I initially couple up to the cars at Benton, nor when I uncouple from them at Santa Fe. btw I started the activity again from the beginning and tried more than once to get those 2 missing DONE messages to appear without success.

        Using the map window I can see that AI Traffic1 just moves a few yards after spawning then stops by a road bridge and then stays stationary. AI Traffic2 is still stationary a way down the track as I'm about to move to pick up at the cement works.

        On the plus side the little shunter (AI Traffic) does move around before disappearing.
        Regards,

        Nick

        ( ' boffin0_reprised ' on TikTok )




        Cyberpower Desktop with AMD Ryzen 5 CPU /. 16GB RAM /. ATI AMD Radeon RX6700 12GB graphics /. Windows 11 Home 64bit /. RailDriver /. Partridge in a pear tree....​

        Comment

        • adreid
          Senior Member


          • Jul 2019
          • 136
          • Toronto, Ontario, Canada
          • General

          #34
          Using the map window I can see that AI Traffic1 just moves a few yards after spawning then stops by a road bridge and then stays stationary. AI Traffic2 is still stationary a way down the track as I'm about to move to pick up at the cement works.
          This behavior is intentional -- the AI trains are placed well ahead of their start times, and held by wait points. When you complete a certain task the wait time is set to zero -- this is to ensure that the train arrives when you are ready to meet it.

          I will check your other comments about events NOT being marked as DONE -- everything in your workorder should be marked as DONE by the time the activity is complete,

          Regards,
          Dan

          Comment

          • niknak
            1000 Post Veteran


            • Nov 1999
            • 1254
            • UK.
            • MSOR

            #35
            Hi Dan, I was about to amend my last post as the 2 AI trains (Traffic1 and Traffic2 do indeed eventually make their way to Santa Fe Siding. I have almost completed the switching there and will post again later.
            Regards,

            Nick

            ( ' boffin0_reprised ' on TikTok )




            Cyberpower Desktop with AMD Ryzen 5 CPU /. 16GB RAM /. ATI AMD Radeon RX6700 12GB graphics /. Windows 11 Home 64bit /. RailDriver /. Partridge in a pear tree....​

            Comment

            • adreid
              Senior Member


              • Jul 2019
              • 136
              • Toronto, Ontario, Canada
              • General

              #36
              Thank you, Nick, for your comments. My advice -- do not waste any more time on this activity -- it has been "fouled" since the final test -- I cannot guarantee that traffic will behave as intended -- I will provide the "final" version (after i have personally tested it) -- I would like you to run the "final" version when it is available.

              Many thanks for your testing expertise!

              Comment

              • niknak
                1000 Post Veteran


                • Nov 1999
                • 1254
                • UK.
                • MSOR

                #37
                lol okay Dan I will try another activity for now and await the final version of this one. It's a great route and deserves another chance!

                This is what I've found so far which probably ties with what you've discovered::

                I had to manually change the switch and signal at Santa Fe to allow AI Traffic1 to go by whilst I was on the passing track.

                The UID numbers need correcting for the Vulcan pickup.

                The popup mentioning dropping off at Vulcan appears after the Grain drop off but shouldn't appear until the Shipping drop off as this has to be done after Grain.
                Regards,

                Nick

                ( ' boffin0_reprised ' on TikTok )




                Cyberpower Desktop with AMD Ryzen 5 CPU /. 16GB RAM /. ATI AMD Radeon RX6700 12GB graphics /. Windows 11 Home 64bit /. RailDriver /. Partridge in a pear tree....​

                Comment

                • dgionet
                  Senior Member



                  • Mar 2006
                  • 323
                  • Delson, Quebec, Canada.
                  • French
                  • MSOR

                  #38
                  Great route Russell, am enjoying it a lot.

                  I was starting the Gideon lumber local at Junipero and noticed the missing turntable. Has anyone else experienced it too?

                  Gideon lumber local.jpg

                  Thanks
                  Denis
                  Running ORMG 173, Win 11
                  Attached Files

                  Comment

                  • Darkhorse427
                    Senior Member


                    • Mar 2012
                    • 284
                    • Eugene Or.
                    • ORTS

                    #39
                    Originally posted by dgionet
                    Great route Russell, am enjoying it a lot.

                    I was starting the Gideon lumber local at Junipero and noticed the missing turntable. Has anyone else experienced it too?

                    Thanks
                    Denis
                    Running ORMG 173, Win 11
                    you need to make sure you copy turntable shapes from Add to Global.zip in the the "Add to Global" sub-folder in the main route folder, the turntable is animated and operable.

                    Comment

                    • Robkeb
                      1000 Post Veteran
                      • Apr 2003
                      • 1115
                      • General

                      #40
                      This is fantastic! A most complete route with activities and rolling stock. A big thank you!!!

                      Rob

                      Comment

                      • dgionet
                        Senior Member



                        • Mar 2006
                        • 323
                        • Delson, Quebec, Canada.
                        • French
                        • MSOR

                        #41
                        Originally posted by Darkhorse427

                        you need to make sure you copy turntable shapes from Add to Global.zip in the the "Add to Global" sub-folder in the main route folder, the turntable is animated and operable.
                        Gideon lumber local2.jpg

                        Case solved!

                        Thanks Russell

                        Denis

                        Comment

                        • bandorr2000
                          Senior Member

                          • Feb 2005
                          • 608
                          • Cinnaminson, New Jersey, USA.

                          #42
                          Running the Eastbound Sunset Zephyr activity there are sections where the Speed post signs say 79 for passenger, but the route only shows 71 as the speed. How do I get the 79mph?
                          Glenn Duba
                          Cinnaminson, NJ

                          Comment

                          • frliss
                            1000 Post Veteran



                            • Mar 2011
                            • 1081
                            • MP44.2 Worcester, MA
                            • General

                            #43
                            Glenn,

                            I've noticed that too. The only way to change that is to dig into the route with TSRE and change the individual speed posts to 79 mph and possibly the route speed as well. Unless you are running engines of your own the maxv for engines supplied with the route is 70 mph.

                            Fred

                            Flashing Rear End Device

                            Comment

                            • dcarleton
                              1000 Post Veteran


                              • Nov 2008
                              • 1006
                              • MSOR

                              #44
                              Originally posted by bandorr2000
                              How do I get the 79mph?
                              Open up the .con file for the Sunset Zephyr. Find the MaxVelocity line and change it from 31.73984 to 35.313.
                              That should fix it.

                              Comment

                              • Darkhorse427
                                Senior Member


                                • Mar 2012
                                • 284
                                • Eugene Or.
                                • ORTS

                                #45
                                Originally posted by bandorr2000
                                Running the Eastbound Sunset Zephyr activity there are sections where the Speed post signs say 79 for passenger, but the route only shows 71 as the speed. How do I get the 79mph?
                                its not a speed post or route speed limit issue. it is because of the F40PH's engine file. I had not noticed that Brody's engine file list the max velocity at 71mph

                                MaxVelocity ( 71mph )

                                change that line to MaxVelocity ( 103mph ) and it will be correct for a standard geared F40PH (NE corridor units were geared to 110mph)

                                also what Dcarleton said.

                                Comment

                                Working...