PaddingtonSignals.jpg
I have two stop signals installed on my Chiltern route at the exit to Paddington station. The first signal, outlined in yellow, is my model of GWR Ground Shunt signal. The second, outlined in red, is a British Railways 2 aspect colour light home signal. This signal refuses to clear to green. It seems that somehow the shunt signal is blocking the action of the colour light signal. If I remove the shunt signal, then the colour light does behave correctly, i.e. it clears to green when necessary. If I reverse the positioning of the two signals, i.e. with the colour light preceding the shunt, then the colour light blocks the shunt from clearing.
Here is the script for the two signals.
SignalScript.jpg
Any ideas anyone what is causing this problem and how to solve it?
Martin
I have two stop signals installed on my Chiltern route at the exit to Paddington station. The first signal, outlined in yellow, is my model of GWR Ground Shunt signal. The second, outlined in red, is a British Railways 2 aspect colour light home signal. This signal refuses to clear to green. It seems that somehow the shunt signal is blocking the action of the colour light signal. If I remove the shunt signal, then the colour light does behave correctly, i.e. it clears to green when necessary. If I reverse the positioning of the two signals, i.e. with the colour light preceding the shunt, then the colour light blocks the shunt from clearing.
Here is the script for the two signals.
SignalScript.jpg
Any ideas anyone what is causing this problem and how to solve it?
Martin