Skipton Carlisle route 1932 search please?

[pcohen]

Hi everybody.

Searching for the "Skipton Carlisle route 1932" Date I think.

Given to understand this Route comes with the Route Stock & activities.

But Search Files only giving results with Variations of the Woodhead Route.

Any help Please.

Thanks

Paul.

[slipperman]

Hi Paul,
There were two Skipton - Carlisle routes released - v1 was 1920 by Pat Dalton and v2 was 1946 by Reg Furness.
I believe Pat also released a Settle - Carlisle 1930 route but I don't think you can get it anywhere now - even I don't have it!!
The 1920s route is available here as file IDs 16362 to 16374 plus 16375 as its readme. I believe it would use the LMSR Stock Pack.
The 1946 route is available as file IDs 19876 + 19877 and 19879 to 19885: Stock is available as file IDs 19874 + 19875.

Cheers,
Ged

[pcohen]

Hi Ged. thanks a lot for the Information.

Will deal with the Route and Rolling Stock Items tomorrow.

Many Thanks again.

Paul

[pcohen]

Hi Ged, me again.

Getting confused here, nothing unusual.

The 16375 readme appears to be for a different Settle - Carlisle Route to the Route you have sent me.

Thanks

Paul.

[baldwin]

Hi Paul
sc1920_readme_first.doc ( UKTS_16375_sc1920_readme_first.doc ) definitely the readme first for the 1920 version of the route. It is the full instructions for how to install this route.

Mervyn

[pcohen]

Hi Mervyn, thanks for your reply.

The UKTS' Numbers supplied Do not Match the readme UKTS Numbers.

Thanks

Paul.

[slipperman]

Hi Paul,
Sorry, I may have misled you regarding the file IDs.for Skipton to Carlisle 1920 (NOT Settle to Carlisle as you mentioned!) - the stock IS included.
Files 16362 + 16367 to 16371 make up the route, 16363 to 16366 + 16373 and 16374 are the stock and activities, while 16372 contains the files to go in the GLOBAL folder.

Cheers,
Ged

[pcohen]

Hi Ged, Thanks for the Update.

regards

Paul.

[pcohen]

Hi everybody.

Must be doing this wrong!!

Have unpacked all the Files Listed but cannot get them to run the Install sequence/process
Installation files seem completely In order.

Think I may have bit off more than I can chew with this one?

Paul.

Apologies, forgot to mention I HAVE Installed the GLOBALS but when Continuing "Asked for DIsk"

Thanks.

[slipperman]

Good Morning, Paul,
There are two possibilities here - either you have one or more corrupted downloads or you've not followed the instructions correctly.

I'm going to assume that the downloads are OK.

After you've unpacked all the files, you should have 3 separate folders :
One containing sc1920_gsetup.exe - this is for adding the required files into the GLOBAL folder - run this file.
One containing the 6 route files, sc1920_rsetup.exe, sc1920_rsetup-1.bin, sc1920_rsetup-2.bin, sc1920_rsetup-3.bin, sc1920_rsetup-4.bin and sc1920_rsetup-5.bin - Only run sc1920_rsetup.exe - the remainder will be processed automatically by the .exe file. A batch file will be run automatically to copy default files.
One containing the 6 stock files, sc1920_ssetup.exe, sc1920_ssetup-1.bin. sc1920_ssetup-2.bin. sc1920_ssetup-3.bin, sc1920_ssetup-4.bin and sc1920_ssetup-5.bin - Only run sc1920_ssetup.exe - the remainder will be processed automatically by the .exe file.

In practice, they could all be included within the same folder without any problem - see page 2 of the installation instructions ("BEFORE Proceeding further...")

Caveat : I have not downloaded the current files from trainsim.com but used my archived files.

Cheers,
Ged

[baldwin]

Hi Paul

You say you have installed Global but when Continuing "Asked for DIsk". What asked for disk? Screenshot_2.jpg
These are the files you need to install the route which are extracted from the downloaded zips. You only need to run each EXE file.

Mervyn

EDIT:- Ged beat me to it, but like he stated, you can have all the files in one folder like I show above.

[pcohen]

Hi Ged & Mervyn. Here Is what's happening now.

I have reinserted the globals but when selecting:- sc1920_rsetup.zip I get the following message:-

The file"sc/1920_rsetup-1bin" could not be located 1C\1MSTS\Routes"
please insert the correct disk or select another folder.

Don't know where to go from here.

Thanks

Paul.

[slipperman]

Hi Paul,
You MUST unpack sc1920_rsetup.zip to give you sc1920_rsetup.exe THEN you must put that file in the same folder as the sc1920_rsetup*.bin files. When you've done that, run sc1920_rsetup.exe, as Mervyn and I have mentioned previously. You MUST do EXACTLY as we told you! Mervyn posted an excellent screenshot - if you make sure your folder looks the same as his, and you run the .exe files, you should not have any problems

Cheers,
Ged

[pcohen]

Well, At least I now have the Route Running.

Unfortunately, the Activities will not Install for me for whatever reason.

Thanks for all the help.

Paul.

[slipperman]

Unfortunately, the Activities will not Install for me for whatever reason.

What do you mean "will not install" ? What message/s do you get?
Be sure that you've got all the sc1920_ssetup*.* files in the same folder and run the sc1920_ssetup.exe. This will add the activities and stock.

Ged