Open Rails 1.6 is here
Collapse
X
-
-
RailDriver still works as intended for me with 1.6. I simply just went in and recalibrated everything before the first initial run though. The RD Run/Stop still works on the RD controller for me.-Shawn K-
MEC Mountain Subdivision - Trackwork 70%, Scenery 35%
Comment
-
👍 1Comment
-
This seems to be an all-too-common problem with 1.6. Sigh.
Cannot be in view 4 camera and do any types of train operations with the F9 key. Kicks you to the desktop every time with this error.
Attached Files-Shawn K-
MEC Mountain Subdivision - Trackwork 70%, Scenery 35%
Comment
-
I also have strong concerns still about the trainline brake system in ORTS 1.6
As an 11-year conductor/engineer and counting, this is still bizarre to me how this plays out. The new feature of partially opening the angle cock is great, however, if it isn't going to work as intended, why even bother to have it? The only time the lead engines and head end set of cars should go into emergency, is if the air gets rushed into the system. I understand this was an issue in 1.4 and 1.5/1.5.1, but why are we allowing this to continue into 1.6 and beyond?
You can skip to roughly 15 minutes into the video, to see what I am referring to.
-Shawn K-
MEC Mountain Subdivision - Trackwork 70%, Scenery 35%
Comment
-
If you like what you see here at Trainsim.com, be it the discussions and knowledge in the forums, or items available in our library, I hope you'll consider a paid membership to help support keeping the site operating.... Thanks!Comment
-
Comment
-
The rolling stock included with every TS route was made before changes were made to emergency brake handling and a ton of other brake system features. OR 1.6 does support modern dump valves that respond to rapid drops in brake pipe pressure (the default implementation triggers based on the brake pipe pressure dropping too low, no matter how slowly) and that vent the brake pipe to accelerate an emergency application. This is done with ORTSEmergencyValveActuationRate ( 20psi/s ) [sets the required rate of brake pipe pressure decrease to trigger an emergency application], ORTSEmergencyDumpValveRate ( 80psi/s ) [sets how quickly the brake pipe is drained locally during an emergency application], and ORTSEmergencyDumpValveTimer ( 120s ) [sets how long the dump valve will remain active, preventing filling the brake pipe]. The thing is, we cannot unilaterally cram new features into old content as not all trains behave the same way. If that were applied to everything, you might be happy but folks from every other continent would be complaining about the opposite problem (though perhaps not on this forum).
At the end of the day, work is required if improvements are desired, and that work is unlikely to come from creators who haven't touched the platform in a decade, nor from creators who are busy making something else right now, nor from creators who just aren't that versed in train setup beyond MSTS. This is why I make my physics mods; that's the best chance a bunch of routes will ever have of keeping up. Though I am behind. At least include files mean that I have fewer files to touch.
Contributing to ORTS since 2023
Find me on GitHub @SteelFill
Like what I do? Join my Patreon to help me do more!Comment
-
Ah, of course. Sounds like end users will have to spend more time editing files to their liking, than being able to open and enjoy. This is starting to feel more like a job...-Shawn K-
MEC Mountain Subdivision - Trackwork 70%, Scenery 35%
👍 1Comment
-
So I went in, edited the files needed with the three lines you offered. Same results. Maybe this isn't worth the battle and frustration and it's time for me to just move on like so many others have.
-Shawn K-
MEC Mountain Subdivision - Trackwork 70%, Scenery 35%
👍 1Comment
-
Gee, it sounds as if some people are slowly making the case that it might be more beneficial to, I dunno, actually segregate the newer content from the older MSTS stuff, to minimize the need to go back and rework a crap-ton of ENG and WAG files all the time. Introduce new features through rolling evolution, not convolution. Now where have we seen such content segregation efforts before? You know, before such efforts were proudly nullified by texture-subbing code changes?
Back when TS route segregation was an unwritten rule, I actually took advantage of it and created an installation centered on those TS routes that utilized only the latest content. Maybe 25% of my payware MSTS rolling stock textures were deemed salvagable, brought forward into this installation after converting to DDS, and then mating with newer versions of those same shape files and WAG physics. Sadly, I needed to learn to live without my undersized MLT-era Danny Beck shape files, and I've tearfully learned how to get by without any CLW GP30s, considering how improved the TS GP30s are. But I survived, and am doing quite well and living quite healthy with the "weight loss".My Open Rails videos https://www.youtube.com/@lakecities3663/videosComment
-
Gee, it's almost like I am trying to get more information out of the developers, when its really not that hard to explain to the rest of us, on what these changes were, to help us in the long run. It's almost like I am trying to understand and help others by raising these questionsGee, it sounds as if some people are slowly making the case that it might be more beneficial to, I dunno, actually segregate the newer content from the older MSTS stuff, to minimize the need to go back and rework a crap-ton of ENG and WAG files all the time. Introduce new features through rolling evolution, not convolution. Now where have we seen such content segregation efforts before? You know, before such efforts were proudly nullified by texture-subbing code changes?
Back when TS route segregation was an unwritten rule, I actually took advantage of it and created an installation centered on those TS routes that utilized only the latest content. Maybe 25% of my payware MSTS rolling stock textures were deemed salvagable, brought forward into this installation after converting to DDS, and then mating with newer versions of those same shape files and WAG physics. Sadly, I needed to learn to live without my undersized MLT-era Danny Beck shape files, and I've tearfully learned how to get by without any CLW GP30s, considering how improved the TS GP30s are. But I survived, and am doing quite well and living quite healthy with the "weight loss".
For the record, if you noticed in the F9 key view, it shows the rear car as closed. However if you notice in the Alt F5 view, it shows the car is open with the "+" Symbol. When I do the little cheat of shift /, that symbol goes for + to / and then to -, showing it is closed, and the air is restored.
With that said, that now raises the question of how do we get around this little issue, so that we aren't sitting there once again, scratching our heads as to why the air is not building.
By the way, I didn't realize "Open Rails 1.5.1 or Higher" For system requirements on the TS MRL Mullan Pass, meant it was MSTS content. Last I checked, This route and equipment didn't work in MSTS, considering the include files needed.
And lastly, this issue occurred with the latest TS stock and route (Shasta) as well. So I guess that means everything needs to be set aside, our entire folder cleaned out, and we patiently wait for newer content, because as far as I am aware. Not a single piece of equipment, or route, for North American content at least, has any of these new fancy features offered within ORTS 1.6.
Last edited by CSRX; 09-25-2025, 10:57.-Shawn K-
MEC Mountain Subdivision - Trackwork 70%, Scenery 35%
Comment





Comment