Roseville Sub v1.2 & Serving Local Industries 1.03 issue

[JSMR]

So trying out another route package. Added the Serving Local Industries. However again there's no sound. In the readme it says this :

his pack includes seven Union Pacific-owned GE locomotives:

Four Union Pacific AC4400CW locomotives
Two Union Pacific CW45ACCTE (ES44AC) locomotives
A Southern Pacific AC4400CW that managed to remain unpatched/unrepainted by UP until 2016

Sounds are aliased to the default Dash 9. Feel free to replace them with something more appropriate.

But I don't get any sounds. I'm guessing its not aliased to the sound at all. 🤔

Looking at the log file, another LONG list of era's relating to this package like the T&P one.

[baldwin]

With regard to the missing Dash9 sounds, the engines are looking for the sound files in a non standard location, C:\Open Rails Content\trains\trainset\UP_GE_Engines_DP\ car sound file ..\..\DASH9\SOUND\D9cab.sms which is probably where the author of the engine set has his sounds, The default location, assuming you have the dash9 installed is Trains\Trainset\DASH9\SOUND\D9cab.sms.

[JSMR]

Oh ok. So how can I change it? Is there a config file or something that needs changing?
I wouldnt have a clue what the Dash9 is let alone if I have it. 😧

[geepster775]

I wouldnt have a clue what the Dash9 is let alone if I have it. 😧

Therein lies your conundrum. For a new user, your cart is officially located in front of your horse.

[JSMR]

Therein lies your conundrum. For a new user, your cart is officially located in front of your horse.

Conundrum indeed! Hopefully emphasis was on 'new user'.

[amtrak115]

the "D9cab.sms" will point to the appropriate .wav file...you just need to make sure they're loaded in the appropriate area.

[JSMR]

There was no D9cab.sms file nor Dash9 trainset in the Open Rails install that was the issue.

I was randomly trying to add another route just before and it had a long list of trainsets in it and one of those was the Dash9 so we have sound now.

Some of this is starting to make sense now. 😵

[yellowdog]

Eric uploaded the default content to the file library

https://www.trainsim.com/forums/file...leid?fid=89797

[JSMR]

Eric uploaded the default content to the file library

https://www.trainsim.com/forums/file...leid?fid=89797

oh nice. Thank you!

[oper190]

If anything is missing try file no. 2001 - it contains all the default MSTS folders and content required for OR and most add-on Routes..
https://www.trainsim.com/forums/file...ileid?fid=2001

[baldwin]

2001 does NOT include the trainset

[oper190]

File 2001 contains all the default trainsets and consists, anything else was an add-on later by an activity creator. Why it's imperative to have a consist editor, ConBuilder or TSRE Consist Editor, as good examples, to make your own versions. Else you'll be beating you head against that old brick wall, getting a bloody forehead trying to find them.

[yellowdog]

If anything is missing try file no. 2001 - it contains all the default MSTS folders and content required for OR and most add-on Routes..
https://www.trainsim.com/forums/file...ileid?fid=2001

Thanks, Paul. That's what I meant to reference

[JSMR]

2001 does NOT include the trainset

Indeed. NO trainsets in 2001 Default Files and Folder.


The only trainsets I originally got was from the starter BSNF scenic sub. I couldn't load the sim without downloading that package and searching on youtube to find out I needed to create seperate folders away from the main install : Open Rails Content > GLOBAL / ROUTES / TRAINS. None of which I saw in the OR manual regarding installation. But its not the first time I've missed the obvious.

However, perhaps that's why there are 'default' trainsets / shapes missing?

[oper190]

Seems you are correct. Has consists but not Trainsets(???)

Mapleleaf Tracks has a freeware replacement for the default Dash 9, and the SD40-2 and GP38-2 have one for one replacements here in the library.