Activity help please?

[pcohen]

Hi everybody, me again, with yet more problems please

For some years now I have been running Dorset Coast Route V.6.

One of the Activities for this Route Is called:-
"The London and Dorset Coast Wanderer".

Today I thought I would Upgrade the Steam Engine and Passenger Stock
to something newer, and although most of you will say "best left alone"
I upgraded It to some Better stock.

I am now running the Activity with the following Stock:-

"Britannia Steam Engine NWC_70000 NWC_70000 plus a rake of LMS MK1 coaches"

Looks great and runs Great.

Here's my problem, On The Waterloo-Weymouth Route, Activity No 90 It will only run approx 2-3 miles and stops by a Yellow Signal at Poupart Junction/West London Junction and will not go any further.

My Question Is If the Steam Loco selected Is wrong Why did It bring me this far In the First place?

Any help please.

Thanks

Paul.

[slipperman]

Hi Paul,
You've already reported this problem on the TSSH Forum where I am attempting to help you.

Without more information, it's doubtful if anybody here would be able to help.

For information, I have tested this activity, with its default consist, in Open Rails and it runs for more than 10 minutes without any problem.

Cheers,
Ged

[pcohen]

Hi Ged, thanks again.

Re-Installed and now seems to be working Fine.

Thanks

Paul.

Double P.S. ConBuilder and TSRE are now both working correctly!!!

[slipperman]

Hi Paul,
That's good news, mate, on all fronts

At least you should (hopefully) have a trouble-free Christmas !!

Compliments of the Season to you and your family.

Cheers,
Ged

[pcohen]

Hi Ged, Thanks again and a very Merry Christmas to you and your Family as well.

My next lot of problems have already started! Ho, Ho.

I have spent the last few Hours trying to get the Cabview For DR_BR_A1_60163_BG "Tornado".

to work with some limited success.

I can run It In Explore Mode? great, but as soon as I create or change a Consist It says It cannot be found?

Never mind I will keep trying.

Have a great Christmas.

Regards

Paul & Family.

[pcohen]

P.S. Hello Again, Now working in a Changed Activity, but with no Sound.

Thanks

Paul.

[slipperman]

Hi Paul,
I think we covered the 'Tornado' sound problem before! There should be a sub-folder of common.sound named A1. The sounds are available in file ID 27204 (UKTS_27204), BUT you must not put folder 3cyli into the common.sound folder - if you have, that's why you have no sound!

Cheers,
Ged