RailDriver Combined Power Controller

[R3DWolf91]

Good Evening Everyone,

Is there any way to use the RailDriver's throttle and dynamic brake control to simulate a combined power controller in OR?

I tried running the Class 377 from the old Europeanbahn London - Brighton add-on, but in OR it uses the auto brake handle to control the brakes. I have not tested the default JR 7000 to see if that is repeated there, but I'm assuming so.

If I remember correctly, back in the day there was a profile you could add to the RD config for the Electrostars, but my memory's a little fuzzy on that.

Thanks!
Jesse

[leonardbrit]

Yes, it is possible to use the RailDriver's throttle and dynamic brake control to simulate a combined power controller in Open Rails (OR). However, it requires some configuration and setup.

Here's a general guide on how you might achieve this:

1. RailDriver Configuration: First, ensure that your RailDriver is properly configured and calibrated. You may need to set up profiles for specific locomotives if necessary.
2. Locomotive Configuration in Open Rails: Check if the locomotive you're using has specific configuration options for controlling the throttle and dynamic brakes. Some locomotives may have options to toggle between different brake systems or control modes. Ensure that the locomotive is set up to accept inputs from the dissertation services uk for throttle and brake control.
3. Scripting or Configuration Files: Depending on the locomotive and its compatibility with RailDriver inputs, you may need to edit or create scripting or configuration files to map the RailDriver inputs to the appropriate controls within the simulation. This could involve editing .eng or .wag files associated with the locomotive to ensure that the throttle and dynamic brake inputs from the RailDriver are interpreted correctly.
4. Testing and Adjustments: After making any necessary changes, test the locomotive in OR to see if the RailDriver inputs are now affecting the throttle and dynamic brake control as intended. You may need to fine-tune the configuration to achieve the desired behavior.
5. Community Resources: Look for any community-created profiles or guides specifically tailored for using RailDriver with Open Rails. Forums and online communities dedicated to train simulation enthusiasts may have valuable resources and discussions on this topic.
6. Updates and Patches: Keep an eye out for updates or patches for both Open Rails and any relevant locomotive add-ons. Sometimes, improvements or fixes may be implemented that enhance compatibility with external control devices like RailDriver.