Open Rails Train Menu please

[charland]

You could just open the ENG file in Notepad, select all and copy it, them paste it in a new message here if the zip doesn't work for you.

Paul :-)

[pcohen]

Hi, thanks for reply.

A Said I tried do this earlier, but with no success.

Was told earlier by Derek to Zip it up, but not sure how to do this.

But during our Posts this morning this may possible have resolved it.

Thanks

Psul.

[crstagg]

Ok Paul,
Now you know why usassco is not displaying in the Locomotive list. It is not a Locomotive.

Back on post #4 you said:
"So I cannot access the following:- WAB F7A, USA145, usassco and VT_HST_125"

Since you cannot ZIP up an ENG and CON file then try this:
Open ConBuilder locate WAB F7A in the Engine list.
On CB's word menu choose "View"
Then choose "Consists using..."
CB will either tell you that the item is not used or it will list the consists that use il.
If it lists consist double click on each to Open the consist then look to see if WAB F7A is the lead if not open the next consist.
Report your findings back here.

[crstagg]

BTW here is how to find out how many locomotives ORTS is listing in its menu:
There are 30 listed at a time. Page down will display the next 30. Count how many times you have to page down to get to last. Multiple by 30. I have 840 in my main MSTS install. (Of course this is not the total number of locomotives in the install. Just the number that lead Consists.)

[pcohen]

Hi Charles, thanks again for reply.

I Thought "usassco" was supposed To be the PasSenger Stock to go with the usaf45, ( which is why when I opened the Consist File it displayed an engine File ) but when I tried to find them again in MSTS to check, it was no where to be found

These Loco's "WAB F7A, and VT_HST_125" worked absolutely fine Until I was unable to access them in the Open Rails Locomotive List.

Thanks.

Paul.

[crstagg]

Hi Charles, thanks again for reply.

I Thought "usassco" was supposed To be the PasSenger Stock to go with the usaf45, ( which is why when I opened the Consist File it displayed an engine File ) but when I tried to find them again in MSTS to check, it was no where to be found

These Loco's "WAB F7A, and VT_HST_125" worked absolutely fine Until I was unable to access them in the Open Rails Locomotive List.

Thanks.

Paul.

I do not care about the past. Test them now like I asked.

[niknak]

I do not care about the past. Test them now like I asked.

Very poetic Charles.

[eric]

Hi Derek, thanks for reply.

I have tried Three times to Post this Engine File to the Forum open on this subject with no success. No Email involved.

I guess the file is to large, but probably wrong.

Thanks

Paul

Here's the instructions on how to attach a file to a post.

https://www.trainsim.com/vbts/tslib.php?do=copyright&fid=38096