Chessie errata

[geepster775]

Finally going through the Chessie pack, and discovered there are textures for 1 B&O coil car and 3 C&O coil cars, but the wag files are all set for 4 C&O cars. Textures are correct, but shape file and wag files for "CO_COIL_306395" need to be renamed to "BO_COIL_306395", any references to CO inside the wag file needs to be changed to BO, and the one freight consist needs to be updated to reflect is it now a B&O car. Shape file does not need to be uncompressed/altered as it already references the proper B&O dds image file name.

Also, there are 2 additional 60' B&O boxcars complete with shape and textures, there just are no companion wag files and because of such they were never part of any consist. I borrowed both the MT and LD wag files from Rock Island boxcar 34502 from the Rock Island pack to bring both BO_489970 and BO_489985 to life in the sim.

http://www.railgoat.railfan.net/other_cars/bo_cars/bo_number/489965-489998.htm

[spoony1999]

Thanks for the heads up. I’ll make the changes on my end

[dcarleton]

If you noticed all that, then perhaps also take a close look at the the two sides of the Canstock boxcars.

[lineman]

Which d/l contains these cars please?

[spoony1999]

Which d/l contains these cars please?

The Chessie set is payware from TrainSimulations

[Timbit]

geepster775,
Thanks for the heads up.
Tim

[dcarleton]

Here's the right side of a Canstock boxcar:

https://rr-fallenflags.org/bo/bo480840akg.jpg

Now, here's the left side of the same car:

https://rr-fallenflags.org/bo/bo480840ckg.jpg

Now, compare to the Canstock boxcars in the Trainsimulations set.

[lineman]

Thank you!