No Object Road Crossing?

[scottb613]

Hi Folks,

I'm wanting to take advantage of Carlo's relatively newish feature - US Style Horn Blows at Crossings for all AI Trains. I'd like to place some road crossing at stations and road crossings (that aren't real road crossings) to trigger the horn/whistle. Is there a crossing object that doesn't have a shape that I can place to facilitate this?

For those unfamiliar - this needs to be manually typed into your "act" file:

ORTSAIHornAtCrossings ( 2 )
ORTSAICrossingHornPattern ( US )

AFTER this line:

NextActivityObjectUID ( 32768 )

I think you may need to unlatch your locomotive bell if so latched - as the bell ringing will continue indefinitely - if you plan to use this feature.

Thanks.

Regards,
Scott

[rdayt]

Any crossing object will work, just check the "Crossing is invisible" check box.

I'm assuming that you're using TSRE.

[ebnertra000]

You will need to put a road section under the track, but any crossing object will do with the Invisible option checked. I have a special object in my sets, but only because it came with a set of passive crossings.

[scottb613]

Hi Randy,

Yep.

Thanks.

That did it.

Regards,
Scott

[scottb613]

Hi Travis,

Uggh - yeah - discovered that last night - crossings needs a road section - so I would need a road section - a crossing object - and probably a sign just to get a whistle blow. Perhaps it's more trouble than it's worth?

On a side note - I also discovered your very fine crossing objects - using the timber ties now - didn't realize how much pop it adds to a crossing that doesn't have them. Thanks for that as well.

Regards,
Scott

[geepster775]

Also remember private crossings (driveway, farm crossing,etc) have no horn blow requirements by law, it is up to the auto/tractor driver to stop and look. So not *all* crossings would have the requirement.

[rdayt]

Here's a visual representation.

The check boxes, "crossing is invisible" and "Silent crossing MSTS HAX", set up a silent rural crossing that road traffic will stop at.


Same spot in game.

Any level crossing object will work.

Randy

[ebnertra000]

If you have 'Invisible Crossing' checked, the crossing will be silent already, so there's no need for the Silent Crossing hack on invisible crossings

[scottb613]

No Object Road Crossing?

Hi Folks,

Thanks for the additional info - I’m probably not going to be doing this - too much effort - there’s an open thread on Elvas to request Whistle Boards that actually work with AI - we’ll see if anything come of it.

Much appreciated. I’ve still learned some new things.

Regards,
Scott


Sent from my iPad using Tapatalk

[drelyea]

Or you could do the one (two) shape method. (two) for two lane roads.

First, make in the ref file: LevelCr(Filename(mucrossbuck.S)Class(RRCrossing)De scription("M&UCrossbuck")) where you place the name of the passive crossing sign where this has (mucrossbuck.S) and ("M&UCrossbuck")

Second, to make road traffic stop add this before the last closing parenthesis in the uncompressed shapefile:
animations ( 1
animation ( 1 1
anim_nodes ( 1
anim_node MAIN (
controllers ( 0 )
)
)
)
)

this is the basic and minimum animation required to stop road traffic.

Bwahahahahahahahahaha!

Ps. don't know why this is putting that space in De scription, it should not be there.