LS&I Route loading issues in Openrails

[richp928]

Screenshot (219).jpgScreenshot (220).jpg

Having troubles getting the LS&I route to function correctly, this is of course with the upgrade available in the downloads area, I have included all available info and error messages.

[richp928]

https://ibb.co/dWz857rhttps://ibb.co/dWz857r

[R. Steele]

Images too small to read, please try again with better screenshots, also please post entire OR log found on desktop, you can zip it up and attach it. Folks will need the log to help you diagnose problems.

At this point all I can say is that I have been running same route with upgrades for some years in all versions of OR and no problems whatsoever.

[slipperman]

Hi richp928,
Welcome to the Forum

When you post reasonably sizes images and the full log file, would you please also specify which upgrade/s you applied. There are three - michiron.zip, michi2.zip or lsiv2.zip. The last one modifies the track system to DB3. The first two are scenery/trees changes

Cheers,
Ged

[richp928]

OpenRailsLog.txt here is the openrails log, hopefully it shows up at least, im new to using these forums

[richp928]

also, this is using lsiv2 with the db3 track upgrade

[slipperman]

Hi,
If you installed the original MLT route and then added the ROUTES and GLOBAL folders from the lsiv2.zip download, you will have no problem running the route, EXCEPT that some of the locos hardly move (but I can't help with that!)

Your log file shows an activity file named file0.act, but there's no such file in the supplied route. This may be the cause of your problem.

Cheers,
Ged

[derekmorton]

The log file shows a number of track pieces missing from global tsection.dat.
The route as installed does not give these errors.
You may need to upgrade the global tsection.dat from the library here, download "tsection56.zip" and copy to the msts global folder.

[derekmorton]

I have just run the Borrowed_power activity, with no errors in the log.

I had installed the lsiv2.zip and the db3 upgrade.

[richp928]

even with installing the tsection56.zip from the library, it still throws up the missing track pieces error that causes the route to terminate the load process

[derekmorton]

As there is two of us running the route fine, your installation is in question.

I would suggest deleting the old install and reinstalling after reviewing the install doco.
If you still have problems, you might post your activity for us to try.