Problem with MonoGame

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • daniellouwrens
    1500 Post Veteran

    • Sep 2005
    • 1730
    • Gandangara Estate, Sutherland Shire. N.S.W, Australia.

    #1

    Problem with MonoGame

    Hi

    I have been going through all my Routes and Acts with OR, so I don't have to spend
    unnecessary time driving I use Autopilot.

    When I changed to MonoGame 100 I started to get errors with any act I ran.

    So I deleted MG100 and returned to MG 99.1 and did not get the errors.

    I have attached the Logs for both ACTS and the Act file, there were no changes
    to the files or rolling stock between runs.

    I cannot decipher any more than the most basic information
    so I need some help here.

    Please have a look and let me know if it's me or not.

    Regards

    Daniel

    yprbmeacsplexp.zipMG 99.1.txtMG100.zip
    Daniel - Sydney (Glad I'm not in Townsville)
    It used to be my favourite place in the world.
  • crstagg
    4500 Post Veteran


    • Nov 1999
    • 4885
    • Huntsville, AL
    • Texan
    • MSOR

    #2
    Run with MG 100 is a Resume
    Run with MG 99 is a Start

    Try running the same ACT with MG 100 and NOT run a resume.
    Charles

    Comment

    • R. Steele
      3500 Post Veteran

      • Feb 2013
      • 3928
      • known universe
      • ORTS

      #3
      Agree with Charles, and also, is there a specific reason why you are running with "RunAt32bit = True" Options\General when you have a 64bit OS?
      Cheers, Gerry
      "A mind is like a parachute. It doesn't work if it is not open." Frank Zappa
      It's my railroad and I'll do what I want! Historically accurate attitude of US Railroad Barons.
      Forever, ridin' drag in railroad knowledge.
      Audi, Vide, Tace, Si Vis Vivere In Pace​

      https://www.trainsim.com/forums/filedata/fetch?filedataid=79656&type=medium​ https://www.trainsim.com/forums/filedata/fetch?filedataid=79654&type=small

      Comment

      • daniellouwrens
        1500 Post Veteran

        • Sep 2005
        • 1730
        • Gandangara Estate, Sutherland Shire. N.S.W, Australia.

        #4
        hI

        OKAY, I'll run both without resume.

        Cheers

        Daniel
        Daniel - Sydney (Glad I'm not in Townsville)
        It used to be my favourite place in the world.

        Comment

        • daniellouwrens
          1500 Post Veteran

          • Sep 2005
          • 1730
          • Gandangara Estate, Sutherland Shire. N.S.W, Australia.

          #5
          Originally posted by R. Steele
          Agree with Charles, and also, is there a specific reason why you are running with "RunAt32bit = True" Options\General when you have a 64bit OS?
          Hi Gerry

          because I did not see the option and 32 was the default.

          Also yesterday both versions faulted out, Im going to try with the option unchecked.

          Regards

          Daniel
          Daniel - Sydney (Glad I'm not in Townsville)
          It used to be my favourite place in the world.

          Comment

          • daniellouwrens
            1500 Post Veteran

            • Sep 2005
            • 1730
            • Gandangara Estate, Sutherland Shire. N.S.W, Australia.

            #6
            Hi

            I ran the this act with NewYear MG (unofficial)-X360 Rev. 99 and then NewYear MG (unofficial)-X370 Rev. 100 it ran all the way through with 99 and errored out with 100.

            I have attached both files.

            I took the check out of the Run at 32 on W64, and did not use resume.

            Most acts I have run with 100 have errored out.

            I would appreciate it if someone who has the knowledge could let me know what
            the problem is.

            I suspect it is hardware related.

            Regards

            Daniel
            MG 99.1.txt.zipmg X370 rev 100.zip
            Daniel - Sydney (Glad I'm not in Townsville)
            It used to be my favourite place in the world.

            Comment

            • crstagg
              4500 Post Veteran


              • Nov 1999
              • 4885
              • Huntsville, AL
              • Texan
              • MSOR

              #7
              Daniel,

              You have miss titled this thread. Appears to me that the problem is with this Route, and maybe this Activity. I wish that Nels had a way to vet route uploads. X number of route type warnings in the ORTS Log.tx when run and the Route upload is rejected.

              What happens when you try to run the player consist on the player path in the explore mode?

              The BOTH log TXT's have 1000+ of errors both Warning and Info categories. Have you tried fixing them?

              There are soooooo many of them that one has no inclination to search for the cause of the crashes.
              Charles

              Comment

              • rdayt
                1000 Post Veteran

                • Nov 2007
                • 1291
                • SW MO
                • ORTS

                #8
                My inclination would be to delete the whole route and try reinstalling.
                If it happened again I'd delete it and forget about it, after picking through the assets for anything useful.

                Randy

                Comment

                • daniellouwrens
                  1500 Post Veteran

                  • Sep 2005
                  • 1730
                  • Gandangara Estate, Sutherland Shire. N.S.W, Australia.

                  #9
                  Charles wrote "The BOTH log TXT's have 1000+ of errors both Warning and Info categories. Have you tried fixing them?"

                  Hi Charles,

                  no, I have no real knowledge of what they are pointing to and why.

                  Cheers

                  Daniel
                  Daniel - Sydney (Glad I'm not in Townsville)
                  It used to be my favourite place in the world.

                  Comment

                  • daniellouwrens
                    1500 Post Veteran

                    • Sep 2005
                    • 1730
                    • Gandangara Estate, Sutherland Shire. N.S.W, Australia.

                    #10
                    Originally posted by rdayt
                    My inclination would be to delete the whole route and try reinstalling.
                    If it happened again I'd delete it and forget about it, after picking through the assets for anything useful.

                    Randy
                    My question is why did MG 99 work and not 100.

                    Any way I guess I will move on and try other Routes and Acts.

                    Cheers

                    Daniel
                    Daniel - Sydney (Glad I'm not in Townsville)
                    It used to be my favourite place in the world.

                    Comment

                    • crstagg
                      4500 Post Veteran


                      • Nov 1999
                      • 4885
                      • Huntsville, AL
                      • Texan
                      • MSOR

                      #11
                      If you open both LOG files is a Text editor and use a "Compare" tool you find that the files are almost identical until line 3901 of the MG ver 100 where this SharpDX Exception occurs. But that is beyond my pay grade.

                      BUT there are so many shape error reported for the route indicates that the route is not worth fooling with.

                      I also notice numerous sound errors indicating you have installed a lot of rolling stock that require additional downloads/installations that you have not accomplished.
                      Charles

                      Comment

                      • R. Steele
                        3500 Post Veteran

                        • Feb 2013
                        • 3928
                        • known universe
                        • ORTS

                        #12
                        Originally posted by crstagg
                        ...I also notice numerous sound errors indicating you have installed a lot of rolling stock that require additional downloads/installations that you have not accomplished.
                        To emphasize what Charles posted --- in my experience sound errors clogging the log can sometimes stop OR.
                        Cheers, Gerry
                        "A mind is like a parachute. It doesn't work if it is not open." Frank Zappa
                        It's my railroad and I'll do what I want! Historically accurate attitude of US Railroad Barons.
                        Forever, ridin' drag in railroad knowledge.
                        Audi, Vide, Tace, Si Vis Vivere In Pace​

                        https://www.trainsim.com/forums/filedata/fetch?filedataid=79656&type=medium​ https://www.trainsim.com/forums/filedata/fetch?filedataid=79654&type=small

                        Comment

                        • daniellouwrens
                          1500 Post Veteran

                          • Sep 2005
                          • 1730
                          • Gandangara Estate, Sutherland Shire. N.S.W, Australia.

                          #13
                          Hi

                          Thanks for the input, I am in the process of fixing the missing stock requirements.

                          Cheer

                          Daniel
                          Daniel - Sydney (Glad I'm not in Townsville)
                          It used to be my favourite place in the world.

                          Comment

                          Working...