load error help

[jiggywatt]

Loading TRK TDB SIGCFG DAT

Warning: Skipped track section 40115 not in global or dynamic TSECTION.DAT

Warning: Skipped track section 40117 not in global or dynamic TSECTION.DAT

Warning: Skipped track section 40257 not in global or dynamic TSECTION.DAT

Warning: Skipped track section 40097 not in global or dynamic TSECTION.DAT

Warning: Skipped track section 40099 not in global or dynamic TSECTION.DAT

Those Track Sections are defined in the Tsection.dat that is in A:\TS Content\ROUTES\BNSF_Scenic

I looked for those track sections too... not found anywhere here. Still scratching my head on this one.

[derekmorton]

They are in the OR local tsection.

[eric]

Derek's correct, that's dynamic track. The tsection.dat in the route folder is missing or not from the correct version of the route.

[jiggywatt]

From the readme file from the download...

Amtrak Empire Builder activity for Trainsimulations BNSF Scenic Sub
Version 1.1 updated 3/14/2021

Maybe this is the problem, I'm using scenic 2.0. I have the route on a HD so I'm going to re-install the route and hope for a fix.

Thanks for the help,

Cheers

[niknak]

If its this file: https://www.trainsim.com/vbts/tslib....ight&fid=36317 dated 03-14-2021, then the activity loads and runs fine in the latest Scenic Route which is currently available on the TS or OpenRails website.

[slipperman]

Hi Jiggywatt,
Sorry. mate, but the only fix would appear to be down to you!

From the Route_Riter report you posted, it looks as if you have mixed the MSTS Scenic Sub v2 with the ORTS Scenic Sub into the same ROUTES folder!!

The activity you're trying to run specifies Scenic Sub v1.1. As far as I can see, there's no such thing, but there are (were) two versions v1.0.1, one which was for MSTS, released about 2006 and the other as an ORTS Starter route, which was the release before the ORTS v2.

Cheers,
Ged

[slipperman]

Hi,
As Niknak has pointed out, the activity is intended, and runs in, the latest ORTS Scenic Sub v2 route, not v1.1!

However, after sorting out the missing HtBaggage folder, a loco is missing. Consist bnsf_grain_mt.con needs BNSF_ES44AC_6140.eng in folder BNSF_Mullan_GE_Engines. Has there been another release of this route which included that loco??

Unless you'd checked the log (but why is it reported 6 times?), you wouldn't know it was missing because Open Rails doesn't complain !
NOTE to self - Must find a way to fix MSTS_ActMan so that > 30 character names are ignored when processing OR-only installations!!

Cheers,
Ged

[jiggywatt]

If its this file: https://www.trainsim.com/vbts/tslib....ight&fid=36317 dated 03-14-2021, then the activity loads and runs fine in the latest Scenic Route which is currently available on the TS or OpenRails website.

That's the activity that has got me miffed. Can't find the Scenic 2.0 route at TS or OR. Would you happen to have a link? I have no problem purchasing the route again because of my mistakes.

Thanks

[crstagg]

That's the activity that has got me miffed. Can't find the Scenic 2.0 route at TS or OR. Would you happen to have a link? I have no problem purchasing the route again because of my mistakes.

Thanks

STARTER ROUTE | TrainSimulations

or

DOWNLOADS | TrainSimulations

[jiggywatt]

Thanks Charles, I have the starter route. Looking for the streamlines version.

[R. Steele]

Thanks Charles, I have the starter route. Looking for the streamlines version.

It was originally payware, released in a couple of versions as explained by slipperman in post#21. The route -- as payware -- is no longer offered...just the "OR starter version" for free. Providing the route to you would violate the end user agreement. Where are your backups?

[derekmorton]

Hi,
As Niknak has pointed out, the activity is intended, and runs in, the latest ORTS Scenic Sub v2 route, not v1.1!

However, after sorting out the missing HtBaggage folder, a loco is missing. Consist bnsf_grain_mt.con needs BNSF_ES44AC_6140.eng in folder BNSF_Mullan_GE_Engines. Has there been another release of this route which included that loco??

Unless you'd checked the log (but why is it reported 6 times?), you wouldn't know it was missing because Open Rails doesn't complain !
NOTE to self - Must find a way to fix MSTS_ActMan so that > 30 character names are ignored when processing OR-only installations!!

Cheers,
Ged

Hi Ged,

I have the 6140, but I don't know where from.
I do have both the msts scenic and the starter pack in heir respective folders.
I can run the activity without error on msts? and it only appears in my msts install.
The path file being called does not exist in my OR install, only the msts install.

Wrt Actman,
rather than 2 pieces of code, one piece that logs >30 but with a message stating that errors in msts will occur, but not OR.

[derekmorton]

I have the amtrak8 activity dated 2006, so its an msts activity.

[niknak]

Hi,
As Niknak has pointed out, the activity is intended, and runs in, the latest ORTS Scenic Sub v2 route, not v1.1!

However, after sorting out the missing HtBaggage folder, a loco is missing. Consist bnsf_grain_mt.con needs BNSF_ES44AC_6140.eng in folder BNSF_Mullan_GE_Engines. Has there been another release of this route which included that loco??

Unless you'd checked the log (but why is it reported 6 times?), you wouldn't know it was missing because Open Rails doesn't complain !
NOTE to self - Must find a way to fix MSTS_ActMan so that > 30 character names are ignored when processing OR-only installations!!

Cheers,
Ged

I have the 6140 which I'm thinking I obtained when I purchased the Mullan route a couple of months ago.

[jiggywatt]

It was originally payware, released in a couple of versions as explained by slipperman in post#21. The route -- as payware -- is no longer offered...just the "OR starter version" for free. Providing the route to you would violate the end user agreement. Where are your backups?

Now that streamlines is gone I can no longer find the route. Tried the wayback machine and tried to purchase the scenic route to no avail. I have backups, just need to find them. I'm not asking for anyone to provide me the route. I have purchased everything streamlines and trainsimulations has to offer. This was something that just occurred out of the blue. Once I find my backups I'll report back. I appreciate all the help.