Not sure which ORTS standard engine file for MLT CN SD70M-2 locomotives??

[cn bala]

I am not sure which is the right file for MLT CN SD70M-2 locomotives from the folder of ORTS_STD_ENG_v2 that R Steele (Gerry) did those files for anyone who are using these files. I just want to make sure the right file for MLT CN SD70M-2 locomotives.

Thank you,

John

[derekmorton]

There are m-2's in Jerry's v2 set.

[=FI=Ghost]

Hi, there!

There are two inc files for SD70M-2 in his "Standard Engine Files" version 2. They differ slighty in terms of the locomotive's weight. Choose the one with the weight closest to the locomotive you want to use it with (you can see the weight in this line: Comment ( Mass 409839lbs = 185.9t == metric, Adhesion Factor = 35.56% )

Gerry has included a Readme file that explains how to correct the weight in case you want to use a different set of values with one of his inc files. The process is not very complicated, so you can do that if you want as well.