where does this tracksound come from?

[johnnyboy99]

example: https://www.youtube.com/watch?v=DzyFzZRmElw

It's a question that has been on my mind for years

[rdayt]

Track noise can be included as part of the locomotive's sms or as a sound region of the route itself.
Pretty easy to tell whether the sound follows the train or stays in place after the train is gone.

Randy

[baldwin]

The clickety clack rail joint sound is part of the track sound system. The sms files used are defined in the trk file. The sms will show which wav files are called. The frequency ( distance between joints ) of the rail joint sound can be adjusted in the sms file/s.

[johnnyboy99]

I meant to say where does this track sound come from as this clearly isn't the default track sound

[baldwin]

There are many different styles of track sounds, but they are all defined in the route trk file. As to which one that was, hard to tell above the noise of the horn and prime mover.

[ebnertra000]

I'm pretty sure track sounds are found in the route's ttype.dat file

[longiron]

I'm pretty sure track sounds are found in the route's ttype.dat file

Exactly. ttype file defines the sms files you can select for track sounds. Placement by the route editor is straightforward. You set a start and an end point for the sound region. When the train passes over the area, the sound plays per the sms file.
SoundRegions.jpg

[baldwin]

Thank you for correcting my error chaps, got a stinking cold and brain clogged up a bit. Whilst it is correct that you define sound regions with start and end points, this does not apply to the default sound. This is played where no other sound is defined , and is the track sound most heard on any route. The actual sound heard will depend on which sms from which track sound set is being used. The time period of the sound can be changed in the sms file. short time gaps for jointed rail and much longer ones for welded rail.

[johnnyboy99]

https://www.youtube.com/watch?v=yzxAoVQF7i4

you can hear the tracksound more clearly at 0:15 of this video

[baldwin]

As said above, that is the base track sound that is heard on all routes. The style will depend on which sound set is used. That in the video is the MSTS default USATrack0Ex.sms. The sounds played are defined within the sms file. The sms and associated wav files are located in the main Sound folder.

[johnnyboy99]

As said above, that is the base track sound that is heard on all routes. The style will depend on which sound set is used. That in the video is the MSTS default USATrack0Ex.sms. The sounds played are defined within the sms file. The sms and associated wav files are located in the main Sound folder.

I thought that was the sound for those really quiet track sounds that fit for interiors

[baldwin]

There is an external and an internal sms for each tracksound. Ex is External, In is Internal.

[johnnyboy99]

There is an external and an internal sms for each tracksound. Ex is External, In is Internal.

I was suspecting the one at the beginning of the video was one of these.

clicker.zip
modtrkv2.zip
newsound.zip

[johnnyboy99]

I wonder if anyone has wav files of USATrackin and USAtrackex files (and any of the default tracksound files).

[johnnyboy99]

If I didn't know any better those track sounds are either from NALW or 3DTS