DDA40X Cabview, Some Items Not Displaying Correctly!?

[meeshu]

Running a DDA40X locomotive with custom cab from this file (dd40xcab.zip) here https://www.trainsim.com/vbts/tslib....ight&fid=18750.

This cabview and all gauges and switches etc are positioned correctly and all work OK under MSTS, but Open Rails does not display the horn lever and one light switch in the correct positions!?

Here is a screenshot of the cab -

OR_DDA40x_Cabview_annotated (FM60).jpg

And the cabview file is also attached.

Why does Open Rails not display the horn lever and one light switch in the correct positions? Also, why is the horn lever image (apparently) reduced in size as well?

Any way to get the lever and switch in their correct positions and at their right sizes?

Running Open Rails version 1.3.1.

[lineman]

The horn needs to be changed to 128 x 128 from 28 x 28 in the cab file. The headlight needs to be changed to 3 1 3 from 3 3 1 in the cab file. The DDx40 I tested also needed the combined throttle added to the engine file to get the throttle and dynamics to function correctly.

[meeshu]

Thank you very much!!

Your changes fixed the issues!

Excellent!!