The numbers are a little big in locomotive cabs for Open Rails

[cn bala]

I have some of the Dieselswest locomotive, Dash 9 #4723 with the numbers show a little big than normal in cab console. What should I do to correct the number?

Your help would be appreciated to ge the numbers show in normal size not big size on cab console.

Thank you,

John

[=FI=Ghost]

Hello!

You can set the Font type and Font size of any digital indicator in the cabview by adding this line: ORTSFont ( 5 0 "Courier New" ) at the end of appropriate section in the cab's .cvf file. Take a look at this example:

Digital (
Type ( BRAKE_PIPE DIGITAL )
Position ( 393 271 26 17 )
ScaleRange ( 0 120 )
Accuracy ( 0 )
AccuracySwitch ( 0 )
LeadingZeros ( 0 )
Justification ( 1 )
PositiveColour ( 1
ControlColour ( 182 201 173 )
)
NegativeColour ( 0 )
DecreaseColour ( 0 )
Units ( PSI )
ORTSFont ( 5 0 "Courier New" )

The first digit inside the brackets (5 in this example) determines the size of the digits. Adjust it until you find the size appropriate for this cab.

[R. Steele]

I have some of the Dieselswest locomotive, Dash 9 #4723 with the numbers show a little big than normal in cab console. What should I do to correct the number?

Your help would be appreciated to ge the numbers show in normal size not big size on cab console.

Thank you,

John

This thread at ET >>> http://www.elvastower.com/forums/ind...age__hl__fonts

...and this section in the manual >>> 14.1.6 Configurable Fonts

Basically it is adding this line after any "digital entry" in the cvf file >> ORTSFont ( 12 1 "Sans Serif" )

You can download and install digital fonts, or use any font you like.

( edit: Just repeated what Borislav posted --- maker of fine cabviews! )