Massive wheel slip problem : Need solution

[baldwin]

Still needs some work on the files. Accelerates very well, up to the maximum of 270KMH with zero wheelslip, but is reluctant to stop. Working on the braking system now.

[sumit7tnp]

Dear Baldwin Sir

OK, I will wait for your kind reply.

Thanks in advance.
With Best Regards
Sumit Mehrotra

[baldwin]

Hi sumit

The zip has 6 eng files plus two amended consists. I have given the train extended dynamic brakes and EP train brakes. No wheelslip and braking now works. Because of the high speeds, braking distances are much longer. Have fun.

[sumit7tnp]

Dear Baldwin Sir

Thank You So much for your kind help and support.

I will one time run the provided consist with eng files & revert to you if I face any concern.

Once again Thank You So Much for ur kind support.

With Best Regards
Sumit Mehrotra

[sumit7tnp]

Dear Baldwin Sir

Thank You So much for your kind help and support.

I Tried playing using consists & eng files as provided by you.

However wheel slip is not occuring but Emergency brakes are getting applied automatically. Once train stops ,emergency brakes release & again train starts. And this cycle gets repeated.

Please advice what can be the root cause of this.& How to avoid this & run at 270 KMPH as suggested by you.

Thank You.

With Best Regards
Sumit Mehrotra

[geepster775]

On the general tab under Options, uncheck the Speed Control checkbox.

[baldwin]

Emergency brake will not automatically apply unless the route maximum speed is less than the train maximum speed. If this is the case, brakes will apply when the route speed limit is exceeded. Solution is edit the route trk file so that the trk speed limit is higher than the consist max speed.

[sumit7tnp]

Dear Baldwin Sir

Greetings..!!!

Kindly accept my Thanks for your help & support.

Issue is resolved & now there is no emergency brake concern as well as no wheel slip problem.

Thank you so much.

With Best Regards
Sumit Mehrotra

[sumit7tnp]

Dear Geepster Sir

Thanks for your kind help.

I have unchecked the Speed Control checkbox as well as edit the route TRK file for speed limit. (Earlier it was 33 , I made it 300)

Thank You.

With Best Regards
Sumit Mehrotra