I noticed that warning lights and wig wag signals do not function in open rails but warning lights work with crossing gates. Is their a solution to get them to work in open rails.
Gerry
Gerry
-
-
Hmmm...I thought I saw them working in a route? Perhaps, the problem is in the route. Since the route was created with MSTS in mind, have you checked to see if they work using MSTS?Cheers, Gerry
"A mind is like a parachute. It doesn't work if it is not open." Frank Zappa
It's my railroad and I'll do what I want! Historically accurate attitude of US Railroad Barons.
Forever, ridin' drag in railroad knowledge.
Audi, Vide, Tace, Si Vis Vivere In Pace
https://www.trainsim.com/forums/filedata/fetch?filedataid=79656&type=medium https://www.trainsim.com/forums/filedata/fetch?filedataid=79654&type=small -
I know it varies from route to route, based on the type of signals used. Some signals do not tend to cooperate with OR for some reason.Comment
-
There is a problem with most of Bruce Bridges animated flashers. They have a fraction in the animation line located near the bottom of the ".s" file that OR doesn't like. Just change the number as in the attached images and now your flashers will work in both MSTS and OR.
Flasher 1.jpgFlasher 1_mod.jpgSteve
USAF VeteranComment
-
Thanks, Steve, COOL, learned something new.Cheers, Gerry
"A mind is like a parachute. It doesn't work if it is not open." Frank Zappa
It's my railroad and I'll do what I want! Historically accurate attitude of US Railroad Barons.
Forever, ridin' drag in railroad knowledge.
Audi, Vide, Tace, Si Vis Vivere In Pace
https://www.trainsim.com/forums/filedata/fetch?filedataid=79656&type=medium https://www.trainsim.com/forums/filedata/fetch?filedataid=79654&type=smallComment
-
Can you please tell me what the file name is and in what folder it is in so I can make those changes. Thank you.
GerryComment
-
Can someone tell me what is the name of the file for the crossing flashers and in what folder it is in so I can make changes.
Gerry KComment
-
You'd need to tell us what shape is being used, or at a minimum, what route it is...
Sent from my SM-G981U using TapatalkIf you like what you see here at Trainsim.com, be it the discussions and knowledge in the forums, or items available in our library, I hope you'll consider a paid membership to help support keeping the site operating.... Thanks!Comment
-
From my experience, I believe there's a process that should be kept in mind. Follow these steps if you are familiar with TSRE.
Step 1 - Each piece of animation has a set of schematics you should follow if you want realism on your route. (Animations include, but are not limited to, gates, flashers, wig-wags, etc.)
Step 2 - If you downloaded some of Travis Ebner's Crossing Signal sets, there should be a readme PDF that explains how to set-up some of the schematics for genuine use on the route. Depending on railroad, they may be adjusted accordingly.
Step 3 - Ensure your new signals work by testing the route.
If all goes well, your wig-wags and crossing flashers/gates will function properly!
Zach Bell
LittleFalls_RailFanComment
Comment