Strong brake

[MYR37]

Hello,this is the command desk I use in Open Rails https://www.youtube.com/watch?v=T-E3ITq_DII I have a braking problem that I can not fix:when I use the train brake 5-7% the train stops too quick.What do I have to modify in ``eng`` for a softer brake? THANK YOU!

Adheasion ( 0.1900 0.7600 1.5022 0 )
DerailRailHeight ( 4cm )
DerailRailForce ( 330kN )
DerailBufferForce ( 400kN )
NumWheels( 12 )
Friction (
150N/m/s 1 -1mph 0 1
5.1N/rad/s 1 -1rad/s 0 1
)


BrakeEquipmentType ( "Triple_valve, Auxilary_reservoir" )

BrakeSystemType ( "Air_single_pipe" )
MaxBrakeForce( 120kN )

TripleValveRatio( 2.42 )
MaxReleaseRate( 1.7 )
MaxApplicationRate( 4 )
MaxAuxilaryChargingRate( 5 )
BrakeCylinderPressureForMaxBrakeBrakeForce( 54 )



AirBrakeMaxMainResPipePressure( 145 )
AirBrakesAirCompressorPowerRating( 1.85 )
AirBrakesMainMinResAirPressure( 0 )
AirBrakesMainMaxAirPressure( 145 )
AirBrakesMainResVolume( 26.19 )
AirBrakesAirCompressorWattage( 44000 )
AirBrakesCompressorRestartPressure( 128 )
AirBrakesAirUsedPerPoundsOfBrakePipePressure( 1.0 )
AirBrakesHasLowPressureTest( 0 )
AirBrakesIsCompressorElectricOrMechanical( 1 )

EngineBrakesControllerMinPressureReduction( 2.35 )
TrainBrakesControllerMinPressureReduction( 2.35 )
EngineBrakesControllerHasProportionalBrake( 1 )
EngineBrakesProportionalBrakeLag( 1 )
EngineBrakesControllerMaxApplicationRate( 1.5 )
TrainBrakesControllerMaxApplicationRate( 2.8 )
EngineBrakesControllerMaxReleaseRate( 1.5 )
TrainBrakesControllerMaxReleaseRate( 2.8 )
EngineBrakesControllerMaxQuickReleaseRate( 15 )
TrainBrakesControllerMaxQuickReleaseRate( 15 )
EngineBrakesControllerEmergencyApplicationRate( 30 )
TrainBrakesControllerEmergencyApplicationRate( 24 )
EngineBrakesControllerMinSystemPressure( 0 )
TrainBrakesControllerMinSystemPressure( 0 )
EngineBrakesControllerMaxSystemPressure( 72.5 )
TrainBrakesControllerMaxSystemPressure( 72.5 )
EngineBrakesControllerEmergencyBrakeTimePenalty( 0 )
TrainBrakesControllerEmergencyBrakeTimePenalty( 0 )
EngineBrakesControllerFullServicePressureDrop( 23.2 )
TrainBrakesControllerFullServicePressureDrop( 23.2 )


Brake_Train ( 0 1 0.075 0
NumNotches ( 6
Notch ( 0 0 TrainBrakesControllerFullQuickReleaseStart )
Notch ( 0.1 0 TrainBrakesControllerReleaseStart )
Notch ( 0.2 0 TrainBrakesControllerNeutralhandleOffStart )
Notch ( 0.3 1 TrainBrakesControllerGraduatedSelfLapLimitedHoldin gStart )
Notch ( 0.9 0 TrainBrakesControllerContinuousServiceStart )
Notch ( 1.0 0 TrainBrakesControllerEmergencyStart )

[cgsmithmo]

The first thing is MaxBrakeForce. Multiply the cars' mass by .39

Next is BrakeCylinderPressureforMaxBrakeForce, should be 70.

The friction line looks off too but need more information...