Ok, been running on OR version 1.1 for at least 3-4 weeks. Haven't had any real problems or 'weird' things happen until last night.
As I open a route, any route, it loads up with whatever consist I pick. Shortly after I open it, within about 10-15 seconds the outer limits start moving in! Look at this progression of screen shots over a ten second span. The outer limits of what it will graphically show, move in until it gets to what I guess is an acceptable limit, and then a white ring forms, that appears to be centered about the camera location. Nothing outside this ring appears, except for the terrain! At first I was thinking tile edges are visible, but that's not it.
OR01.jpgOR02.jpgOR03.jpgOR04.jpgOR05.jpg
In this instance it is on the D&H MLT route, but it has happened to any route I open, Conn River Route, Tristate, ATSF Marceline sub, and a couple of routes I'm working on that have nothing but track on it. Another thing to note is that when I start the locomotive and train the ring moves with it. When I press the 4 key the train moves toward the ring and then disappears into it! It's almost like a science fiction movie. I am thinking it is something to do with the graphics card or the settings, but nothing changed from the time it was running ok, till this!
Has anyone else had anything like this happen to them?
Basic info:
Dell Inspiron N7110, i5 2450MCPU 2.50Hz 64 bit with 6GB RAM on windows 7 Home Premium, intel graphics built in card
As I open a route, any route, it loads up with whatever consist I pick. Shortly after I open it, within about 10-15 seconds the outer limits start moving in! Look at this progression of screen shots over a ten second span. The outer limits of what it will graphically show, move in until it gets to what I guess is an acceptable limit, and then a white ring forms, that appears to be centered about the camera location. Nothing outside this ring appears, except for the terrain! At first I was thinking tile edges are visible, but that's not it.
OR01.jpgOR02.jpgOR03.jpgOR04.jpgOR05.jpg
In this instance it is on the D&H MLT route, but it has happened to any route I open, Conn River Route, Tristate, ATSF Marceline sub, and a couple of routes I'm working on that have nothing but track on it. Another thing to note is that when I start the locomotive and train the ring moves with it. When I press the 4 key the train moves toward the ring and then disappears into it! It's almost like a science fiction movie. I am thinking it is something to do with the graphics card or the settings, but nothing changed from the time it was running ok, till this!
Has anyone else had anything like this happen to them?
Basic info:
Dell Inspiron N7110, i5 2450MCPU 2.50Hz 64 bit with 6GB RAM on windows 7 Home Premium, intel graphics built in card
)
Comment