System Access Violation Exception?

[INRDfan]

After running in "explore" mode on the Monon-2 route, when switching to the "passenger" view, OR crashed and displayed the following error:

OR error.jpg

I've had the sim installed for about 2 years now, and have never run into this issue. Any ideas as to what may cause it?

[OTTODAD]

After running in "explore" mode on the Monon-2 route, when switching to the "passenger" view, ORTS crashed. I've had the sim installed for about 2 years now, and have never run into this issue. Any ideas as to what may cause it?

Depends on which consist you use and using the same computer's Windows all this time ?

[INRDfan]

Same computer, same OS. It is a Streamlines consist, 3 CSX locomotives, 70 hoppers, and a caboose. This is the first time I have run this consist, so not sure if that may be the issue. I ran it for about 1 and a half hours before the crash.

[OTTODAD]

This is the first time I have run this consist, so not sure if that may be the issue. I ran it for about 1 and a half hours before the crash.

A consist needs to have an Inside ( ...... parameter in one of its locos, cars or wagons to respond to the #5 key being pressed.

But ORTS should not crash if the consist does not have any !