Indrail v2 graphics problem help!

[aniruddha1234]

Hi guys,
I am aniruddha.

Before i tell you what exactly my problem is.........here are my system specifications:-
Lenovo B590 Laptop
Intel Core-i3 2.4 gHz processor
Intel Hd 4000 1.8GB graphics card
Windows 8.1 OS
4 GB ram
500 GB HDD

Now i know many people would be wondering how am i running MSTS on a system with Win8.1 and an Intel Graphics card.....Actually i am not......I am using open rails to run msts routes and activities.

So, here's my problem.

Just a few days ago I installed IndRail V2 by ARNAB SINHA. I installed the route correctly and also downloaded and installed all the rolling stock required. Now the activities are working properly, i am able to drive the train and i also completed an activity. But............. all the other things except the train....like the platform, the terrain, the scenery, etc. are all grey!!!!!!! I dont see a colour!!!!!!! Here's an image of what i am saying.......



And here is my log file too.

http://m.uploadedit.com/ba3d/1433216397262.txt

So.....um......what is it??
I would be so thankful if someone could help......

[longiron]

Please re-post or move this post to the OpenRails section with your log file attached.

[R. Steele]

Two or three things come to mind...
Incorrect or missing installation of route (textures missing)
Check option settings for OR...viewing distance, world object density, etc. anything to do with textures ---these may be set too high for your hardware
Laptops seem to have these problems sometimes...individually tune the OR settings for your rig.
AND...does the log contain entries concerning missing textures?

[Navcom]

Sometimes texture in not missing, just an error in names of textures. For example i have problem with needle on speedometer in a cabview - speedo needle is missing - and found error in cvf file-data for texture must look like this: Graphic ( BlackNeedle.ace ) but in this case look like this: Graphic ( BlackNeedle .ace ) just an syntax error in texture name and when i correct texture name everything is OK. So maybe you have same or similar problem with texture names in this route.

[aniruddha1234]

So what do you guys suggest i do??? Please post steps to fix this guys coz i am not a programmer.............

[aniruddha1234]

Sometimes texture in not missing, just an error in names of textures. For example i have problem with needle on speedometer in a cabview - speedo needle is missing - and found error in cvf file-data for texture must look like this: Graphic ( BlackNeedle.ace ) but in this case look like this: Graphic ( BlackNeedle .ace ) just an syntax error in texture name and when i correct texture name everything is OK. So maybe you have same or similar problem with texture names in this route.

So how do i fix it if this is the problem? How do i know that the name of which texture is wrong???

[aniruddha1234]

Two or three things come to mind...
Incorrect or missing installation of route (textures missing)
Check option settings for OR...viewing distance, world object density, etc. anything to do with textures ---these may be set too high for your hardware
Laptops seem to have these problems sometimes...individually tune the OR settings for your rig.
AND...does the log contain entries concerning missing textures?

Um..... i have installed the route properly.
And about the hardware......i run hitman 5 on high graphic settings and the game works flawlessly...so why is open rails causing problem.
Is the log an excel file lying on my desktop???? I'll upload it here for you guys.

[aniruddha1234]

Here's my log......

http://m.uploadedit.com/ba3d/1433216397262.txt

I know there are too many WARNINGS in this. What are they?? How do i fix it please help please!

[aniruddha1234]

Thanks a lot!!!!

Thanks a lot for your help guys!!!! Turns out you all were right!!! The textures were missing.
I recopied all the textures from my INDRAIL V2 folder to my INDRAIL V2 folder in routes and it worked!!!!
YAY!!!! Thank you all!!! Love you trainsim!!







But the problem aint completely solved yet..........
Wheres the ground!!!!!!!!!

[Navcom]

So how do i fix it if this is the problem? How do i know that the name of which texture is wrong???

For check texture name open every shape with Archibald and klick on Images (if you use Archibald you don't need to decompress file for check but don't change anything in file) and check what is written in texture name line. If is texture name different than written in shape file correct name of texture (best option is copy name from shape file then rename texture with pasting name what you copy). For this you must have option in Windows: Hide extensions for known tipe files > Disabled to you can see how is written name for texture (for example if this option is enabled texture nam is displayed only name without extension (like this: ACleanTrack1) if this option disabled texture name is displayed like this: ACleanTrack1.ace. Then check every texture name for every shape file (texture name must bi written same like in shape file if not shape is displayed blank like not have texture). This is big and long time work so this is only last option. Second option is to contact author of this route, tell them for problem and ask them for solution. Checking textures name is option if you not have too much textures for check (some routes have more than 100 textures in Texture folder). So, it's youre choice if you want check textures name or contact author of route. I' have one situation (in MSTS) where is name of shape file written wrong and (different than in route ref file) and MSTS is reporting that shape file is missing but when i check this missing file i see is written wrong name and when correct name everything is OK. So best option is to contact author of route and ask him for help if you not have much expirience with correcting errors in files. You can also check for an update (fix) for this route if exist. Some routes have missing textures and author of route upload fix pach for route so check if some pach for this route is uploaded.

[arnab123]

Hello,
Sorry for the late response.The route unfortunately has sections wherein the tile size is greater than 2 X 2. If you use MSTS to run,it is not a problem,however in OR,it fails to detect/load texture for the tile which are not 2 X 2. For example,New Delhi to Ambala/Agra you will find the 'white' terrain.

There is no immediate solution to this. To rectify this,
1.Either I have to relay the Tiles & create 2 X 2 tiles.This will however wipe out the existing terrain.
2.If OR can pitch in & make the texture available for the 'bigger' tiles.(Not sure if they have already patched this)

I will write to the OR technical team,requesting the same since rebuilding terrain will be a tedious task.

Thanks.
Arnab

[ramnathpurmanjunath]

Open Rails 2016-11-01 08-01-19.jpg

while playing Indian Rail V2 on Open Rails, Grass is not visible in almost half of the route please help me in solving this

[ramnathpurmanjunath]

I am facing the same problem please suggest me a solution for this

[baldwin]

As has already been explained, there is currently no solution for this.

[sukhvipin1]

hello ,

I am not able to see any traffic in nfr route , Can you please help me