Engines 'Glued' to rails

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • amtrak1993
    Member
    • Jan 2012
    • 92

    #1

    Engines 'Glued' to rails

    Greetings! I recently tried running a train in Open Rails featuring a lashup of E7As and twelve passenger cars, however I've run into a slight problem. The train won't move! The engines are two of the E7s included in the American Classics pack from Train Artisan, while the cars are a mix of TA stock and some freeware NYC from the file library. I load the sim, release the brakes and wait for the air to charge and release. Once the brakes are done, I open the throttle and the wheels just spin, spin, spin, and that's just in notch 1. I've used this consist with the TA steams engines from that pack and they work just fine. Any suggestions of what I should do? Many thanks!
  • trainbot1
    Senior Member
    • Sep 2014
    • 248
    • La Salle, IL

    #2
    Mabye check the .ENG file, mabye it doesn't have enough power?
    ROCK ISLAND
    https://www.YouTube.com/trainbot1

    Comment

    • longiron
      1000 Post Veteran and Moderator

      • Jan 2007
      • 1453
      • Just south of NYC

      #3
      Please attach the ENG file as there are probably better parameters (as it dates from the very early days of MSTS), so we can take a look.
      Chris
      "True rail fans have two favorite railroads. The B&O and one other."

      Comment

      • eolesen
        9500 Post Veteran and Administrator



        • Dec 2002
        • 9583
        • NS MP245.4 CNO&TP South District
        • English, SQL
        • General

        #4
        It's been years, but I believe the TA locomotives/stock have either retainers or handbrakes set on startup, so you may have a third step to perform...

        Try a Shift [ to turn off the retainers.

        Also a Shift ; to turn off the handbrakes.


        You might also want to throw down some sand. 12 cars might be too much for a pair of E7's.
        Last edited by eric; 05-29-2015, 11:33.
        If you like what you see here at Trainsim.com, be it the discussions and knowledge in the forums, or items available in our library, I hope you'll consider a paid membership to help support keeping the site operating.... Thanks!

        Comment

        • amtrak1993
          Member
          • Jan 2012
          • 92

          #5
          Here's the ENG files.
          Attached Files

          Comment

          • amtrak1993
            Member
            • Jan 2012
            • 92

            #6
            eric,

            I did think to check to make sure the retainers were off while I was in Open Rails and they were off. As for the length of the consist, I just created a new one with just two E7As and got the same effect. Sanding didn't do anything either.

            Comment

            • Robkeb
              1000 Post Veteran
              • Apr 2003
              • 1115
              • General

              #7
              Change MaxPower ( 1496kN ) to MaxPower ( 1496kW ).

              Comment

              • amtrak1993
                Member
                • Jan 2012
                • 92

                #8
                That did the trick! Many thanks for all the help

                Comment

                • eolesen
                  9500 Post Veteran and Administrator



                  • Dec 2002
                  • 9583
                  • NS MP245.4 CNO&TP South District
                  • English, SQL
                  • General

                  #9
                  Ah... one of those typos MSTS either ignored or corrected, but ORTS enforces...
                  If you like what you see here at Trainsim.com, be it the discussions and knowledge in the forums, or items available in our library, I hope you'll consider a paid membership to help support keeping the site operating.... Thanks!

                  Comment

                  • R. Steele
                    3500 Post Veteran

                    • Feb 2013
                    • 3928
                    • known universe
                    • ORTS

                    #10
                    Originally posted by amtrak1993
                    That did the trick! Many thanks for all the help
                    ConBuilder will catch those errors, you should look into it.
                    Cheers, Gerry
                    "A mind is like a parachute. It doesn't work if it is not open." Frank Zappa
                    It's my railroad and I'll do what I want! Historically accurate attitude of US Railroad Barons.
                    Forever, ridin' drag in railroad knowledge.
                    Audi, Vide, Tace, Si Vis Vivere In Pace​

                    https://www.trainsim.com/forums/filedata/fetch?filedataid=79656&type=medium​ https://www.trainsim.com/forums/filedata/fetch?filedataid=79654&type=small

                    Comment

                    • Robkeb
                      1000 Post Veteran
                      • Apr 2003
                      • 1115
                      • General

                      #11
                      Originally posted by R. Steele
                      ConBuilder will catch those errors, you should look into it.
                      Correct. Open Rails also tells you this in the log file.

                      Comment

                      Working...