Train Brakes Will Not Release
Collapse
X
-
-
I'm aware it is a problem with either something I'm doing or possibly something I did to the simulator. I wouldn't be surprised if the problem fixes itself somehow, as that happened a lot when I used MSTS. Thanks again.Comment
-
Main reservoir is constantly low of pressure, that's why it cannot fill your brake pipe instantly. The long release time is because of that it is the compressor that is (slowly) pumping up the pressure. You might try increasing the main reservoir volume, so it could store more air.Peter Gulyas
sigpicComment
-
One thing with the OR braking system. The lower the pressure in the pipes, the longer it takes to pump up and release the brakes. I also notice that you have a single pipe engine on a twin pipe car set. Not sure if that might contribute to the problem.Beer is not a matter of life or death, it is much more serious than that.Comment
-
Ya know, reading this thread, it appears that OR is simulating what would happen if you actually had a problem with a main reservoir or other malfunction in the brake system.
Except here it is probably caused by a low or incorrect setting in the wag or eng files?Cheers, Gerry
"A mind is like a parachute. It doesn't work if it is not open." Frank Zappa
It's my railroad and I'll do what I want! Historically accurate attitude of US Railroad Barons.
Forever, ridin' drag in railroad knowledge.
Audi, Vide, Tace, Si Vis Vivere In Pace
https://www.trainsim.com/forums/filedata/fetch?filedataid=79656&type=medium https://www.trainsim.com/forums/filedata/fetch?filedataid=79654&type=smallComment
-
Thanks again for all the help guys. The problem has not been solved yet, but I'm going to give Open Rails a break for a while anyways as I need to focus on other things.Comment





Comment