Openrails and low fps

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • csx8851
    Senior Member
    • Feb 2013
    • 347
    • CSX Freemont Secondary

    #1

    Openrails and low fps

    I dont know why, but for some odd reason, im getting low fps running the lastest developmental and experimental versions.

    My computer specs:

    ATI Raedon 2400 HD Pro 256 MB graphics card
    Intel Core 2 Duo 2.53 Ghz 2 Cpus
    4 GM RAM
    120 GB HDD
    Vista 32 bit


    On MSTS, the same route would give me 40-50 fps but on openrails its 10-15, I can't even reach 20 fps
    Visit me on Youtube:
    https://www.youtube.com/user/csx8851
  • baldwin
    6000 Post Veteran


    • Nov 1999
    • 6358
    • Chippenham, Wiltshire, UK.
    • ORTS

    #2
    MSTS uses the CPU for processing the game code. Open Rails uses the CPU and the GPU. Looks like your Graphics card is the slow item. Use the F5 hud to look at the processes, Shift+F5 until you get the right screen. That will show you the various processes and how much load there is on each of them.
    Beer is not a matter of life or death, it is much more serious than that.

    Comment

    • csx8851
      Senior Member
      • Feb 2013
      • 347
      • CSX Freemont Secondary

      #3
      The GPU section says 15 fps, so I'm guessing its the GPU?
      Visit me on Youtube:
      https://www.youtube.com/user/csx8851

      Comment

      • lindsayts
        Senior Member
        • May 2010
        • 194

        #4
        I think the amount of memory the Graphics card is not enough, 256k these dasy is quite small. ! gig though works fine, ie its not required (for OR anyway) to go above 1 gig.

        Also OR does definitely benefit from a 4 core system, its not to difficult on some routes (the freeware Berninan Bahn and also the SOB) to get a total cpu load as indicated by the F5 hud at well over 200 percent.

        Comment

        • derekmorton
          5500 Post Veteran



          • Nov 1999
          • 5699
          • Eltham, Victoria, Australia.
          • ORTS

          #5
          >ATI Raedon 2400 HD Pro 256 MB graphics card

          This is not a very powerful card, not good enough for Open Rails.

          Comment

          • rdamurphy
            8000 Post Veteran
            • Nov 1999
            • 8429
            • Where Standard Gauge is 3 feet between the rails.

            #6
            Realistically, the RAM isn't really the problem.

            What you want to look for is shader capability. Your card supports 40 shaders. A Radeon 7790, for instance, supports 896.

            To understand shaders, see:



            In OR, all of what you see drawn on the screen is done by your GPU's shader units.

            Which is why some older video cards and some low-end laptop video chips don't work with OR.

            I could give you some recommendations, but you didn't include your MB in your specs, but assuming PCI Express X16 from the 2400, I'd say check out this page:

            Here are the best graphics cards for gaming, for every monitor resolution and budget.


            Robert
            Last edited by rdamurphy; 10-04-2013, 03:25.
            sigpic

            Comment

            • csx8851
              Senior Member
              • Feb 2013
              • 347
              • CSX Freemont Secondary

              #7
              It is a PCI Express X16. I'm not upgrading my card at the moment. What were the recommendations you wanted to give me?
              Visit me on Youtube:
              https://www.youtube.com/user/csx8851

              Comment

              • rdamurphy
                8000 Post Veteran
                • Nov 1999
                • 8429
                • Where Standard Gauge is 3 feet between the rails.

                #8
                Pretty much the ones in the link. I had a Radeon 6670 in my old Core2 Duo compute, and I can assure you that it runs OR and MSTS both well. And I'm usually running OR along with Visual Studio.net, and I used three monitors with it.

                I also used a 4770 before that with good results. Presently using a an HD7790 in my i7.

                I tend to be an ATI fan, though.

                Robert
                sigpic

                Comment

                • lindsayts
                  Senior Member
                  • May 2010
                  • 194

                  #9
                  I run OR on a number of systems, one does not need a high end card. I currently have 3 systems on my (Linux) network that will run OR all machines have quad core or better cpu's. The GPU's are a Radeon 5870, an NVidia GTX570 and an NVidia GTX 680 4gig card. All of these run OR at relatively similiar frame rates.

                  There appears to be little difference between AMD and NVidia cards, there is a sugestion that the NVidia cards give a slightly smoother performance.

                  From my experience OR's frame is currently limited by the render thread.

                  Comment

                  • rdamurphy
                    8000 Post Veteran
                    • Nov 1999
                    • 8429
                    • Where Standard Gauge is 3 feet between the rails.

                    #10
                    There aren't any limits in the code, and, in fact, I get FPS in the 140's, occasionally dropping into the 100's with a lot going on.

                    Robert
                    sigpic

                    Comment

                    Working...