Streamlines working with OR

[Norfolk&Southern 1894]

I am running Streamlines SD70 in OR and I can not get sounds to work. Somehow the lights started working (they didn't work for a week and vuala).

Engine sounds and horn work fine in MSTS but OR doesn't get them. I have copied my .eng config for anyone willing to point me in the right direction.

Sound ( "..\\..\\MLT_REQUIRED\\MLT_SOUNDS\\NS\\T710_ST_EMD AIeng.sms" )
)

Engine ( NS_SD70_2531AI
Effects
(
DieselSpecialEffects
(
Exhaust1
(
0 4.6 0.95
0 1 0
0.2
)
)
)

Also, I do not have a cab view. Any direction would be nice!

SIMISA@@@@@@@@@@JINX0h0t______

Tr_CabViewFile (
CabViewType ( 2 )
CabViewFile ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\sd40F rnt.ace" )
CabViewWindow ( 0 25 611 310 )
CabViewWindowFile ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\AcWnd Frn.ace" )
Position ( 1.1 3.5 6.8 )
Direction ( 5 -15 0 )
CabViewFile ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\sd40L eft.ace" )
CabViewWindow ( 20 50 620 300 )
CabViewWindowFile ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\AcWnd Lft.ace" )
Position ( 1.1 3.5 6.8 )
Direction ( 8 -65 0 )
CabViewFile ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\sd40R ight.ace" )
CabViewWindow ( 0 0 640 480 )
CabViewWindowFile ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\AcWnd Rgt.ace" )
Position ( 1.1 3.5 6.8 )
Direction ( 8 55 0 )
EngineData ( EMD SD40 )
CabViewControls ( 19
Lever (
Type ( THROTTLE LEVER )
Position ( 295 347 156 46 )
Graphic ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\throt tle.ace" )
Style ( SPRUNG )
MouseControl ( 1 )
NumFrames ( 9 3 3 )
NumPositions ( 9 0 1 2 3 4 5 6 7 8 )
NumValues ( 9 0 0.125 0.25 0.375 0.5 0.625 0.75 0.875 1 )
Orientation ( 0 )
DirIncrease ( 1 )
ScaleRange ( 0 1 )
)
Lever (
Type ( DYNAMIC_BRAKE LEVER )
Position ( 240 303 156 46 )
Graphic ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\dynam ics.ace" )
Style ( SPRUNG )
MouseControl ( 1 )
NumFrames ( 9 3 3 )
NumPositions ( 10 0 1 2 3 4 5 6 7 8 9 )
NumValues ( 10 0 0.11 0.22 0.33 0.44 0.55 0.66 0.77 0.88 1.0 )
Orientation ( 0 )
DirIncrease ( 0 )
ScaleRange ( 0 1 )
)
Lever (
Type ( TRAIN_BRAKE LEVER )
Position ( 98 275 124 60 )
Graphic ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\autom aticbrake.ace" )
Style ( NOT_SPRUNG )
MouseControl ( 1 )
NumFrames ( 10 5 2 )
NumPositions ( 5 0 1 7 8 9 )
NumValues ( 5 0 0.3 0.85 0.9 0.95 )
Orientation ( 0 )
DirIncrease ( 0 )
ScaleRange ( 0 1 )
)
Lever (
Type ( ENGINE_BRAKE LEVER )
Position ( 151 413 98 56 )
Graphic ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\indbr ake.ace" )
Style ( NOT_SPRUNG )
MouseControl ( 1 )
NumFrames ( 9 3 3 )
NumPositions ( 9 0 1 2 3 4 5 6 7 8 )
NumValues ( 9 0 0.125 0.25 0.375 0.5 0.625 0.75 0.875 1 )
Orientation ( 0 )
DirIncrease ( 0 )
ScaleRange ( 0 1 )
)
Digital (
Type ( SPEEDOMETER DIGITAL )
Position ( 392 107 32 32 )
ScaleRange ( 0 130 )
Accuracy ( 0 )
AccuracySwitch ( 10 )
LeadingZeros ( 0 )
Justification ( 1 )
PositiveColour ( 0
ControlColour ( 164 185 0 )
)
NegativeColour ( 0 )
DecreaseColour ( 0 )
Units ( MILES_PER_HOUR )
)
TwoState (
Type ( BELL TWO_STATE )
Position ( 173 350 30 30 )
Graphic ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\bell. ace" )
NumFrames ( 2 2 1 )
Style ( ONOFF )
MouseControl ( 1 )
)
TwoState (
Type ( SANDERS TWO_STATE )
Position ( 175 320 25 26 )
Graphic ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\sande r.ace" )
NumFrames ( 2 2 1 )
Style ( ONOFF )
MouseControl ( 1 )
)
TwoState (
Type ( HORN TWO_STATE )
Position ( 186 121 41 79 )
Graphic ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\horn. ace" )
NumFrames ( 2 2 1 )
Style ( ONOFF )
MouseControl ( 1 )
)
TriState (
Type ( DIRECTION TRI_STATE )
Position ( 322 391 92 34 )
Graphic ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\rever ser.ace" )
NumFrames ( 3 3 1 )
Style ( NONE )
MouseControl ( 1 )
Orientation ( 0 )
DirIncrease ( 1 )
)
TriState (
Type ( FRONT_HLIGHT TRI_STATE )
Position ( 218 361 35 32 )
Graphic ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\light s.ace" )
NumFrames ( 3 3 1 )
Style ( NONE )
MouseControl ( 1 )
Orientation ( 0 )
DirIncrease ( 1 )
)
Dial (
Type ( LOAD_METER DIAL )
Position ( 388 201 2 20 )
Graphic ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\Needl eWhite.ace" )
Style ( NEEDLE )
ScaleRange ( -800 1600 )
ScalePos ( 269 127 )
Units ( AMPS )
Pivot ( 15 )
DirIncrease ( 0 )
)
Dial (
Type ( MAIN_RES DIAL )
Position ( 213 207 2 20 )
Graphic ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\Needl eRed.ace" )
Style ( NEEDLE )
ScaleRange ( 0 160 )
ScalePos ( 213 131 )
Units ( PSI )
Pivot ( 15 )
DirIncrease ( 0 )
)
Dial (
Type ( EQ_RES DIAL )
Position ( 213 207 2 20 )
Graphic ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\Needl eWhite.ace" )
Style ( NEEDLE )
ScaleRange ( 0 160 )
ScalePos ( 213 131 )
Units ( PSI )
Pivot ( 15 )
DirIncrease ( 0 )
)
Dial (
Type ( BRAKE_CYL DIAL )
Position ( 272 204 2 20 )
Graphic ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\Needl eRed.ace" )
Style ( NEEDLE )
ScaleRange ( 0 160 )
ScalePos ( 213 131 )
Units ( PSI )
Pivot ( 15 )
DirIncrease ( 0 )
)
Dial (
Type ( BRAKE_PIPE DIAL )
Position ( 272 204 2 20 )
Graphic ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\Needl eWhite.ace" )
Style ( NEEDLE )
ScaleRange ( 0 160 )
ScalePos ( 213 131 )
Units ( PSI )
Pivot ( 15 )
DirIncrease ( 0 )
)
TwoState (
Type ( RESET TWO_STATE )
Position ( 175 260 25 26 )
Graphic ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\alert er.ace" )
NumFrames ( 2 2 1 )
Style ( ONOFF )
MouseControl ( 1 )
)
MultiStateDisplay (
Type ( WHEELSLIP MULTI_STATE_DISPLAY )
Position ( 389 244 8 9 )
Graphic ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\wheel slip.ace" )
States ( 2 2 1
State (
Style ( 0 )
SwitchVal ( 0 )
)
State (
Style ( 0 )
SwitchVal ( 1 )
)
)
)
MultiStateDisplay (
Type ( DYNAMIC_BRAKE_DISPLAY MULTI_STATE_DISPLAY )
Position ( 284 303 11 8 )
Graphic ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\dynam icnums.ace" )
States ( 10 2 5
State (
Style ( 0 )
SwitchVal ( 0 )
)
State (
Style ( 0 )
SwitchVal ( 0.11 )
)
State (
Style ( 0 )
SwitchVal ( 0.22 )
)
State (
Style ( 0 )
SwitchVal ( 0.33 )
)
State (
Style ( 0 )
SwitchVal ( 0.44 )
)
State (
Style ( 0 )
SwitchVal ( 0.55 )
)
State (
Style ( 0 )
SwitchVal ( 0.66 )
)
State (
Style ( 0 )
SwitchVal ( 0.77 )
)
State (
Style ( 0 )
SwitchVal ( 0.88 )
)
State (
Style ( 0 )
SwitchVal ( 1 )
)
)
)
MultiStateDisplay (
Type ( THROTTLE_DISPLAY MULTI_STATE_DISPLAY )
Position ( 339 342 7 10 )
Graphic ( "..\\..\\MLT_REQUIRED\\MLT_CABS\\EMDCABVIEW\\throt tlenum.ace" )
States ( 9 3 3
State (
Style ( 0 )
SwitchVal ( 0 )
)
State (
Style ( 0 )
SwitchVal ( 0.125 )
)
State (
Style ( 0 )
SwitchVal ( 0.25 )
)
State (
Style ( 0 )
SwitchVal ( 0.375 )
)
State (
Style ( 0 )
SwitchVal ( 0.5 )
)
State (
Style ( 0 )
SwitchVal ( 0.625 )
)
State (
Style ( 0 )
SwitchVal ( 0.75 )
)
State (
Style ( 0 )
SwitchVal ( 0.875 )
)
State (
Style ( 0 )
SwitchVal ( 1 )
)
)
)
)
)

[crstagg]

Well for one thing NS_SD70_2531AI would appear to be an AI unit. But What is a Streamlines loco doing with MLT sounds?

[demando]

Sounds to me like an alias.

[Norfolk&Southern 1894]

Haha, I just realized I built the consist incorrectly.... Then why can I operate the consist fine in MSTS?

[edwardk]

MSTS is actually a bit more forgiving when it comes to certain errors, but OR on the other hand requires all entries that point to directories and files to be 100% correct and this also includes files that may be missing.

Edward K.

[eric]

MSTS is actually a bit more forgiving when it comes to certain errors, but OR on the other hand requires all entries that point to directories and files to be 100% correct and this also includes files that may be missing.

Correct that MSTS can be more forgiving on some consist/equipment errors, however I find OR is far more forgiving in other errors, e.g. missing shapes/textures, and rendering non-square textures. Items which would cause a crash to the desktop or a modal box are simply logged.

[Norfolk&Southern 1894]

I'm really baffeled right now. I do not show a AI version when editing the consist in MSTS AE, only driveable on the train. Should I just go looking for sounds that already work in ORTS and install them?

[apco25]

MLT sounds work in OR just fine! SLI sounds work in OR just fine! Check your aliasing. Pay attention to AI vs driveable engines. Check your end first before going off and blaming OR.

[OTTODAD]

Do a Windows Search for MLT_Required to see what that comes up with !

O t t o

[apco25]

I must be the only person who can manage to make anything work.... I just tested a bunch of MLT products using there sounds and I "see" make that hear no issues in OR. Nothing pops out while searching for MLT_Required that is OR specific besides this thread....