How do I get this engine to work? f7100f10.zip is the engine, and the only modifications I have done is to .cvf and .sms, that's it. The locomotive has a constant steam usage rate of 1595 lb/h, no matter what percentage the throttle is in, and at max throttle, full reverser, won't budge. Thanks.
-
-
I changed the maxboilerpressure from ( 20bar ) to ( 220psi ) and it runs fine. The actual equivilent psi for 20bar needs to be looked up and substituted for the 220psi I used to see if that would just get the engine moving. -
OH thank you!!!! I got it running now, and it's about 290.1PSI, so thank you VERY much for that! Now I can keep running my favorite steamer! ^^Comment
-
Thank you for the conversion numbers!Comment
-
Oh hey no problem! Also having a secondary issue maybe you can help with. When I apply the brakes, they won't release... At all. They all say 'State Lap' even in the release position, I'm using the BLW Hiawatha cars... Any idea what's up?Comment
-
I don't know the set I'm using is the freeware set, fairly heavily modified, from the f/l. Good luck!Comment
Comment