No Rails in the Yards - WP3

[nicober]

Hello!

I run Open Rails on many routes whitout any major problems if I except some one reported.

But when I try OR on the Feather River Route (WP3) many rails disappear on two yards. WP3 use Scale Rail system and everything work fine in MSTS. I run just a simple locomotive for my consist, a BNSF GP38-2 rm # 2098 of Eric Cantu in Explore Mode, strick minimum for a consist and nothing more. The two yards in question are Portola and Oroville.

First screen take with MSTS in Explore Mode: BNSF GP38-2 rm # 2098 in Oroville Yard - Everything is OK.

MSTS-WP3-Oroville_Yard.jpg

Second screen take with OR in Explore Mode: BNSF GP38-2 rm # 2098 in Oroville Yard - Some rails are missing.

OR-WP3-Oroville_Yard.jpg

Is other simmers encounter this problem on the WP3 route like me in OR?

It seems this problem does not appear with the NVidia graphic card possessors.
The problem seems similar to intermittent exaust engin in an old version of OR with ATI Radeon cards and not with NVidia cards.
Is it possible a wrong setting with my graffic card?
\My graphic card is an ATI Radeon HD 4830 - 512 Mo GDDR3

I have not found other problems on any other roads except XTRACK in night with some parts are very brightness.

I use Open Rails V. 0.7

[UP_4848_Thunder]

Yes I have it too but think its a SR and OR thing waiting to be solved.

[ilFarinach]

I had similar problems with other games: solution was to disable Adaptive-Anti-Aliasing in graphic card control center. I'm not sure if it works also for OR.

[Sidestep]

I get the same thing .. I rolled back a driver (nvidia) but I only found a solution by totally scrapping the driver applied AA

[nicober]

Hello!

I tried many settings with the Catalyst Control Center with no succes, the rails in the yards are always missing.
But the only positive point, I found a better setting for the views. Now the vegetation on the other routes aren't
moving like glitter but not 100%.

I found some informations on the web about the settings of the CCC for games here:

http://www.tomshardware.co.uk/anti-aliasing-nvidia-geforce-amd-radeon,review-32166-6.html

http://www.witnessthis.co.za/2010/06/07/vertical-sync-and-antialiasing-explained/

http://www.tweakguides.com/ATICAT_1.html

Thank gentlemen for your answers. I hope the next release available soon will correct this problem.