Error with ORTS 0.6.2.776 on ATSF Marceline Sub. V1.0

[norbertdx]

System.IndexOutOfRangeException: Index was outside the bounds of the array
at ORTS.SignalObject.NexSignal()
at ORTS.SignalObject.next_sig_lr(SIGFN fn_type)
at ORTS.SignalHead.Update()
at ORTS.SignalObject.Update()
at ORTS.Signals.Update(Single elapsedClockSeconds)
at ORTS.Simulator.Update(Single elapsedClockSeconds)
at ORTS.UpdaterProcess.Update()
at ORTS.UpdaterProcess.UpdateLoop()

any ideas?

SPECS
Win 7 Home Prem
Processor: AMD Athlon 64x2 Dual-Core Processor TK-53 1.70 GHZ
Installed mem: 4.00 GB (2.69 GB usable)
System type: 32-bit Op System


And yes, I did follow the instructions..

[kraus]

The program is failing on track vector 2514 looking for signal 1817. I was able to get the program to run by altering line 672 in file Signals.cs to

if ( sigIndex !=-1 && signalObjects[sigIndex] != null && signalObjects[sigIndex].thisRef != thisRef) // Not a signal head for this signal

The code above it returns a sigIndex of -1. Still remaining to determine is why it is returning -1 for this signal.

Edit: I have identified the track in the route that is causing the problem with the signal. I missed repairing this in my patch. The next patch will include this repair. If you would like to repair this yourself add a section of track to the junction node with the red pole as show in the attached picture. The junction node is near -94.60330963 39.08187485.

This problem was detected by TsUtils which reported

'TrackNode(2515)-TrPin(0)': '0-Reference' of the Node-Definition may cause error(s).