BVE: D3DRM.DLL problem

[VICTOR]

I'm having problem with BVE program and T. Viewer. I found one route from Japan and tried it.

1. I've noticed that in one folder bitmapy have japanese charachters names. I renamed that, tested in Structur Viewer, and everything seemed to be ok. But, after loading the route, I received error report about missing files (around 20 errors) but I ignored them.
After some 7-8 km, I had a crash - Windows Error Report in d3drm.dll module.

2. I thought thjat it could be because of some remained japanese charachters in route scripT. I fixed error one by one line. It really was. Here is example:

.freeobj 0,1,0,0,0,,,@|@|,,,.crack 0,1,0,,, (etc...)

I removed that @|@| and run the route smoothly. I thought that that's it.

3. After few hours (and restart of computer), I've tried again. there was no error at the start, but at the 7 km - again Windows Error Report and T. V. is frozen. I must say that I don't know what to do.

[ChrisCooper]

RE: D3DRM.DLL problem

If it's loading fine, but crashing whilst driving, it's more likely to be a problem with the route file than the objects. A useful thing to do is to run in viewer mode (CTRL-M) and use the up arrow to move along the track. This should cause the crash aswell. Make a note of the Z distance in the bottom left of the screen. Find the view distance (right click, option, graphic tab, viewing distance) and add this to the Z distance of the crash, and the error will most likely be around this point in the route file. If you are really stuck, copy 25m either side of the point of the crash + view distance and paste it to the forum, and the rest of us can have a look and see if we can spot something you have missed.

[VICTOR]

RE: D3DRM.DLL problem

Thanks.

Here is route's website, it is BVE2 version:

http://www.pure-and-tears.com/railway/kakutetsudo/bve.html

From 0-6 km everything is ok, and then, at the bridge aproach - entering, crash.

So far I've prepaired 2 pics aboiut that and route script (edited by myself, erased all junk charachters).

[VICTOR]

RE: D3DRM.DLL problem

I can't be very precise but ic collapses at 6224 m. I have felling that it could be due objects (25 and 50 m rule, because I had to deal with that with bridge onb my Panorama route. Though, BVE didn't crashed but bridge vanished). It is interesting that error starts in 6224m. If you skip that section (by choosing station) continue is OK, but short. There are also 3-4 critical points, one at the very end of the route. 3 points are also with bridges, one with station.